|
|
Número de pieza | DS8922A | |
Descripción | RS-422 Dual Differential Line Driver and Receiver Pairs | |
Fabricantes | National Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DS8922A (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! June 1998
DS8922/DS8922A/DS8923A TRI-STATE®
RS-422 Dual Differential Line Driver and Receiver Pairs
General Description
The DS8922/22A and DS8923A are Dual Differential Line
Driver and Receiver pairs. These devices are designed spe-
cifically for applications meeting the ST506, ST412 and
ESDI Disk Drive Standards. In addition, the devices meet the
requirements of the EIA Standard RS-422.
These devices offer an input sensitivity of 200 mV over a
±7V common mode operating range. Hysteresis is incorpo-
rated (typically 70 mV) to improve noise margin for slowly
changing input waveforms. An input fail-safe circuit is pro-
vided such that if the receiver inputs are open the output as-
sumes the logical one state.
The DS8922A and DS8923A drivers are designed to provide
unipolar differential drive to twisted pair or parallel wire trans-
mission lines. Complementary outputs are logically ANDed
and provide an output skew of 0.5 ns (typ.) with propagation
delays of 12 ns.
Both devices feature TRI-STATE outputs. The DS8922/22A
have independent control functions common to a driver and
receiver pair. The DS8923A has separate driver and receiver
control functions.
Power up/down circuitry is featured which will TRI-STATE
the outputs and prevent erroneous glitches on the transmis-
sion lines during system power up or power down operation.
The DS8922/22A and DS8923A are designed to be compat-
ible with TTL and CMOS.
Features
n 12 ns typical propagation delay
n Output skew — ±0.5 ns typical
n Meets the requirements of EIA Standard RS-422
n Complementary Driver Outputs
n High differential or common-mode input voltage ranges
of ±7V
n ±0.2V receiver sensitivity over the input voltage range
n Receiver input fail-safe circuitry
n Receiver input hysteresis — 70 mV typical
n Glitch free power up/down
n TRI-STATE outputs
Connection Diagrams
DS8922A Dual-In-Line
DS008511-1
Order Number DS8922M, DS8922N,
DS8922AM or DS8922AN
See NS Package Number M16A or N16E
TRI-STATE® is a registered trademark of National Semiconductor Corp.
© 1998 National Semiconductor Corporation DS008511
www.national.com
1 page Switching Time Waveforms
DS008511-3
AC Test Circuits and Switching Waveforms
FIGURE 1.
DS008511-4
FIGURE 2.
DS008511-5
5 www.national.com
5 Page Typical Performance Characteristics (DS8923A) (Continued)
Receiver Short Circuit
Current vs Temperature
Receiver Short Circuit
Current vs VCC
Typical Applications
DS008511-36
ESDI Application
DS008511-37
DS008511-11
11 www.national.com
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet DS8922A.PDF ] |
Número de pieza | Descripción | Fabricantes |
DS8922 | TRI-STATE RS-422 Dual Differential Line Driver and Receiver Pairs | National Semiconductor |
DS8922A | RS-422 Dual Differential Line Driver and Receiver Pairs | National Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |