|
|
PDF DSPIC33FJ06GS202 Data sheet ( Hoja de datos )
| Número de pieza | DSPIC33FJ06GS202 | |
| Descripción | 16-bit Digital Signal Controllers | |
| Fabricantes | Microchip | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DSPIC33FJ06GS202 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
dsPIC33FJ06GS101/X02 and
dsPIC33FJ16GSX02/X04
16-Bit Digital Signal Controllers (up to 16-Kbyte Flash and up to
2-Kbyte SRAM) with High-Speed PWM, ADC and Comparators
Operating Conditions
• 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
• 3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS
Core: 16-Bit dsPIC33F CPU
• Code-Efficient (C and Assembly) Architecture
• Two 40-Bit Wide Accumulators
• Single-Cycle (MAC/MPY) with Dual Data Fetch
• Single-Cycle Mixed-Sign MUL plus Hardware Divide
• 32-Bit Multiply Support
Clock Management
• ±2.0% Internal Oscillator
• Programmable PLLs and Oscillator Clock Sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast Wake-up and Start-up
Power Management
• Low-Power Management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
High-Speed PWM
• Up to Four PWM Pairs with Independent Timing
• Dead Time for Rising and Falling Edges
• 1.04 ns PWM Resolution
• PWM Support for:
- DC/DC, AC/DC, Inverters, PFC and Lighting
• Programmable Fault Inputs
• Flexible Trigger Configurations for ADC Conversions
Advanced Analog Features
• ADC module:
- 10-bit resolution with up to 2 Successive Approximation
Register (SAR) converters (4 Msps) and up to
six Sample-and-Hold (S&H) circuits
- Up to 12 input channels grouped into six conversion
pairs, plus two voltage reference monitoring inputs
- Dedicated result buffer for each analog channel
• Flexible and Independent ADC Trigger Sources
Advanced Analog Features (Continued)
• Up to Four High-Speed Comparators with Direct
Connection to the PWM module:
- Programmable references with 1024 voltage points
Timers/Output Compare/Input Capture
• Three General Purpose Timers:
- Three 16-bit and one 32-bit timer/counter
• Two Output Compare (OC) modules
• Two Input Capture (IC) modules
• Peripheral Pin Select (PPS) to allow Function Remap
Communication Interfaces
• UART module (12.5 Mbps):
- With support for LIN/J2602 protocols and IrDA®
• 4-Wire SPI module
• I2C™ module (up to 1 Mbaud) with SMBus Support
• PPS to allow Function Remap
Input/Output
• Sink/Source 18 mA on 8 Pins, 10 mA on 10 Pins
and 6 mA on 17 Pins
• 5V Tolerant Pins
• Selectable Open-Drain and Pull-ups
• External Interrupts on up to 30 I/O Pins
Qualification and Class B Support
• AEC-Q100 REVG (Grade 1, -40ºC to +125ºC)
• AEC-Q100 REVG (Grade 0, -40ºC to +150ºC)
• Class B Safety Library, IEC 60730, VDE Certified
• 6x6x0.5 mm UQFN Package Designed and
Optimized to ease IPC9592A 2nd Level Temperature
Cycle Qualification
Debugger Development Support
• In-Circuit and In-Application Programming
• Two Breakpoints
• IEEE 1149.2-Compatible (JTAG) Boundary Scan
• Trace and Run-Time Watch
2008-2014 Microchip Technology Inc.
DS70000318G-page 1
1 page  
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Pin Diagrams (Continued)
28-Pin QFN-S(2)
= Pins are up to 5V tolerant
AN2/RA2
AN3/RP0(1)/CN0/RB0
AN4/RP9(1)/CN9/RB9
AN5/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/RP1(1)/CN1/RB1
OSC2/CLKO/RP2(1)/CN2/RB2
28 27 26 25 24 23 22
1 21
2 20
3 19
4 dsPIC33FJ06GS102 18
5 17
6 16
7 15
8 9 10 11 12 13 14
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
TCK/RP12(1)/CN12/RB12
TMS/RP11(1)/CN11/RB11
VCAP
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
28-Pin QFN-S
= Pins are up to 5V tolerant
AN2/CMP1C/CMP2A/RA2
AN3/CMP1D/CMP2B/RP0(1)/CN0/RB0
AN4/CMP2C/RP9(1)/CN9/RB9
AN5/CMP2D/RP10(1)/CN10/RB10
VSS
OSC1/CLKIN/RP1(1)/CN1/RB1
OSC2/CLKO/RP2(1)/CN2/RB2
28 27 26 25 24 23 22
1 21
2 20
3 19
4 dsPIC33FJ06GS202 18
5 17
6 16
7 15
8 9 10 11 12 13 14
PWM2L/RP14(1)/CN14/RB14
PWM2H/RP13(1)/CN13/RB13
TCK/RP12(1)/CN12/RB12
TMS/RP11(1)/CN11/RB11
VCAP
VSS
PGEC1/SDA/RP7(1)/CN7/RB7
Note 1:
2:
The RPn pins can be used by any remappable peripheral. See Table 1 for the list of available peripherals.
The metal plane at the bottom of the device is not connected to any pins and is recommended to be
connected to VSS externally.
2008-2014 Microchip Technology Inc.
DS70000318G-page 5
5 Page 
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
Pin Diagrams (Continued)
44-Pin TQFP
= Pins are up to 5V tolerant
PGEC1/SDA/RP7(1)/CN7/RB7
RP20(1)/CN20/RC4
RP21(1)/CN21/RC5
RP22(1)/CN22/RC6
RP19(1)/CN19/RC3
VSS
VCAP
TMS/PWM3H/RP11(1)/CN11/RB11
TCK/PWM3L/RP12(1)/CN12/RB12
PWM2H/RP13(1)/CN13/RB13
PWM2L/RP14(1)/CN14/RB14
1 33
2 32
3 31
4 30
5 dsPIC33FJ16GS404 29
6 28
7 27
8 26
9 25
10 24
11 23
OSC2/CLKO/AN7/RP2(1)/CN2/RB2
OSC1/CLKI/AN6/RP1(1)/CN1/RB1
RP17(1)/CN17/RC1
VSS
VDD
RP26(1)/CN26/RC10
RP25(1)/CN25/RC9
AN5/RP10(1)/CN10/RB10
AN4/RP9(1)/CN9/RB9
AN3/RP0(1)/CN0/RB0
AN2/RA2
Note 1: The RPn pins can be used by any remappable peripheral. See Table 1 for the list of available peripherals.
2008-2014 Microchip Technology Inc.
DS70000318G-page 11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet DSPIC33FJ06GS202.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DSPIC33FJ06GS202 | 16-bit Digital Signal Controllers | Microchip |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |