DataSheet39.com

UT750UL Datasheet PDF


UT750UL - Tripp Lite

Part Number UT750UL
Description PowerVerter 120V 750W Utility/Work Truck 12VDC Inverter/Charger
Manufacturers Tripp Lite 
Logo Tripp Lite Logo 
Preview
Preview 1 page
		
UT750UL datasheet
---------------------------------------------
UT750UL pdf, equivalent, schematic
3 position operating mode switch supports “AUTO” mode to enable automatic transfer between DC and AC modes, CHARGE ONLY to maintain a full
battery charge when AC is present without auto transfer and SYSTEM OFF settings
Set of 6 front panel LED’s display continuous status
Set of 4 dip switches support wet/gel/AGM battery charging profiles, adjustable 135/145V high voltages and selectable 75/85/95/105V AC low voltage
auto transfer during brownouts
Set of 4 additional dip switches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger
low/high settings
Resettable 10A charger AC input breaker and settable 12A AC output breaker and automatic 2-speed cooling fan
Automatic overload and thermal (overheating) shutoff
Front panel remote control connector enables remote off/on switching with included APSRM4 remote
Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
Specifications
OUTPUT
Nominal Output Voltage(s)
Supported
120V
Frequency Compatibility
60 Hz
Output Receptacles
(2) 5-15R
Output (Watts)
750
Continuous Output Capacity (Watts) 750
Peak Output Capacity (Watts)
1500
Output Voltage Regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line Source. Inverter Power (AC) Maintains
PWM sine wave output voltage of 120 VAC (+/- 5%)
Output Frequency Regulation
60 Hz (+/- 0.3Hz)
Overload Protection
Includes 10A input breaker dedicated to the charging system and 12A output breaker for AC output loads.
Outlet Details
2 NEMA 5-15R GFCI protected outlets
INPUT
Nominal Input Voltage(s) Supported
Recommended Electrical Service
Maximum Input Amps / Watts
Input Connection Type
Input Cord Length Details
Voltage Compatibility (VAC)
Voltage Compatibility (VDC)
120V AC
DC INPUT: Requires 12VDC input source capable of delivering 73A for the required Duration (when used at full
continuous capacity- DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A
120VAC recommended.
DC INPUT: Full continuous load of 73A at 12 VDC. AC INPUT 29 amps at 120 VAC with full inverter and charger
load (9.3A max charger only / combined input load to support charger and AC output is automatically controllable to
66% - 33% - 0% based on AC)
DC INPUT: Set of two DC bolt-down terminals. AC INPUT: NEMA 5-15R input plug
DC INPUT: User supplies cabling. 6 gauge or larger (see manual) AC INPUT: attached 6ft. AC line cord with plug.
120
12
2/4
---------------------------------------------





Information Total 4 Pages
Download[ UT750UL.PDF Datasheet ]

Share Link :

Electronic Components Distributor

SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Element14 Chip One Stop


Featured Datasheets

Part NumberDescriptionManufacturers
UT750ULThe function of this parts is a PowerVerter 120V 750W Utility/Work Truck 12VDC Inverter/Charger.Tripp Lite
Tripp Lite

Quick jump to:

UT75  1N4  2N2  2SA  2SC  74H  ADC  BC  BF  BU  CXA  HCF  IRF  KA  KIA  LA  LM  MC  NE  ST  STK  TDA  TL  UA 



DataSheet39.com is an Online Datasheet PDF Search Site.
It offers a large amount of data sheet, You can free PDF files download.
The updated every day, always provide the best quality and speed.



Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  SCR



www.DataSheet39.com    |   2017   |  Contact Us   |  New  |  Search