|
|
PDF AMEL20-AZ Data sheet ( Hoja de datos )
| Número de pieza | AMEL20-AZ | |
| Descripción | AC-DC / DC-DC Converter | |
| Fabricantes | AIMTEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AMEL20-AZ (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
FEATURES:
Click on Series name for product info on aimtec.com
Series AMEL20-AZ
20 Watt | AC-DC / DC-DC Converter
I/O Isolation 3000VAC
Operating Temp: -40 oC to +80 oC
Over load and, Over Voltage Protection
Input: 90-305VAC, 47-440Hz, or 130-430VDC
Energy Star compliant
Ultra small package
Up to 81% efficiency
Short Circuit Protection
Models
Single output
CB
Model
Input Voltage
(VAC/Hz)
Input
Voltage
(VDC)
Max
Output
wattage
(W)
Output
Voltage(V)
Output
Current
max (A)
Maximum
capacitive
load (µF)
Efficiency
(%)
115 230 277
VAC
VAC
VAC
AMEL20-3.3SAZ 90-305/47-440 130-430
13.2
3.3
4
5600
73 73 72
AMEL20-5SAZ
90-305/47-440 130-430
20
5
4
4700
77 77 76
AMEL20-12SAZ
90-305/47-440 130-430
20
12
1.66
3300
80 80 80
AMEL20-15SAZ
90-305/47-440 130-430
20
15
1.33
2200
81 80 80
AMEL20-24SAZ
90-305/47-440 130-430
20
24
0.84
1000
79 80 79
Note: Optional mounting plate version can be order by adding “-ST” suffix to part number (ex. AMEL20-5SMAZ-ST)
Input Specifications
Parameters
Current (full load)
Inrush current <2ms (cold start)
Leakage current
External fuse
Input dissipation
Start-up time
Conditions
115 VAC
230 VAC
277 VAC
115 VAC
230 VAC
277 VAC
Recommended slow blow type
(115/230/277 VAC)
Typical
1.5
≦0.5
150
Maximum
460
290
260
30
50
55
0.25
Units
mA
mA
mA
A
A
A
mA
A
W
ms
Output Specifications
Parameters
Voltage accuracy
Line regulation
Load regulation
Transient recovery time
Transient response deviation
Ripple & Noise*
Hold-up time
Conditions
(LL-HL)
0-100% load
25% load step
Typical
±2
±1
±2
500
±2
200
10
*Ripple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) and 47µF (E/C) parallel capacitor.
Maximum
Units
%
%
%
µs
% of Vout
mV p-p
ms
Isolation Specifications
Parameters
Tested I/O voltage
Isolation resistance
Conditions
60 sec
Typical
>1000
Rated
3000
Units
VAC
MΩ
General Specifications
Parameters
Switching frequency
Over load protection
Over voltage protection
Conditions
Foldback
Typical
65
130
Zener Diode Clamp
Maximum
Units
KHz
%
www.aimtec.com
F 052e R8.H
Tel: +1 514 620 2722
1 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
1 page  
Dimensions of Optional ST Mounting Plate Version
Series AMEL20-AZ
20 Watt | AC-DC / DC-DC Converter
Pin Out Specification ST Version
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer
controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary
based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C,
humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all
internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for
release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications
which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available
at www.aimtec.com.
www.aimtec.com
F 052e R8.H
Tel: +1 514 620 2722
5 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet AMEL20-AZ.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AMEL20-AZ | AC-DC / DC-DC Converter | AIMTEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |