|
|
PDF AM2L-NZ Data sheet ( Hoja de datos )
| Número de pieza | AM2L-NZ | |
| Descripción | DC-DC Converter | |
| Fabricantes | AIMTEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AM2L-NZ (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
FEATURES:
Click on Series name for product info on aimtec.com
Series AM2L-NZ
2 Watt | DC-DC Converter
• Low Profile SMD (Surface Mount Device) • MTBF>1,000,000 hours
• 1000VDC & 6000VDC Isolation
• Operating temperature: -40°C to +85°C
• Industry Standard Pinout
• High Efficiency up to 85%
• Unregulated Single, Dual, Dual Separated Output Models
Models
Single output
Model
AM2L-0515S-NZ
*AM2L-1205S-NZ
*AM2L-1212S-NZ
AM2L-0505SH60-NZ
AM2L-1205SH60-NZ
AM2L-1215SH60-NZ
AM2L-2405SH60-NZ
AM2L-2412SH60-NZ
AM2L-2415SH60-NZ
Input Voltage(V)
4.5-5.5
10.8-13.2
10.8-13.2
4.5-5.5
10.8-13.2
10.8-13.2
21.6-26.4
21.6-26.4
21.6-26.4
Output Voltage
(V)
15
5
12
5
5
15
5
12
15
Output Current
max(mA)
133
400
167
400
400
133
400
167
133
Isolation
(VDC)
1000
1000
1000
6000
6000
6000
6000
6000
6000
Efficiency
(%)
84
82
85
77
78
81
79
82
80
Models
Dual output
Model
AM2L-0505D-NZ
*AM2L-0509D-NZ
AM2L-0512D-NZ
*AM2L-0515D-NZ
*AM2L-1205D-NZ
*AM2L-1209D-NZ
*AM2L-1212D-NZ
AM2L-1215D-NZ
Input Voltage
(V)
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
10.8-13.2
10.8-13.2
10.8-13.2
10.8-13.2
Output Voltage
(V)
±5
±9
±12
±15
±5
±9
±12
±15
Output Current
max (mA)
±200
±111
±83
±67
±200
±111
±83
±67
Isolation
(VDC)
1000
1000
1000
1000
1000
1000
1000
1000
Efficiency
(%)
82
83
84
82
83
84
84
85
Models
Dual Separated output
Model
Input Voltage Output Voltage Output Current
(V) (V) max (mA)
Isolation
(VDC)
Efficiency
(%)
*AM2L-050505D-NZ
4.5-5.5
5/5
200/200
1000
82
*AM2L-120505D-NZ
10.8-13.2
5/5
200/200
1000
82
*AM2L-121515D-NZ
10.8-13.2
15/15
67/67
1000
85
*Not recommended for new design
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters
Voltage range
Nominal
5
12
24
Typical
4.5-5.5
10.8-13.2
21.6-26.4
Maximum
Units
VDC
www.aimtec.com
F 051e R12.Q
Tel: +1 514 620 2722
1 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
1 page  
Recommended Filter Circuit
+ Vin
L
Single Output
Cin +
DC DC
- Vin
L
+Vout + Vin
L
+Cout
Cin +
- Vin
- Vin
Series AM2L-NZ
2 Watt | DC-DC Converter
Dual Output
DC DC
L
+Vout
+
Cout
Common
+
L Cout
-Vout
+ Vin
L
Cin +
- Vin
Dual Separated Output
DC DC
L
+V1output
+ Cout
-V1 output
L
+ Cout
+V2 output
-V2 output
If it is required to decrease the input/output ripple an “LC” filter network can be installed on the input and output of the
converter (see above).
It should be noted that the inductance and the resonant frequency of the “LC” filtering network should differ from the DC/DC
converter switching frequency to avoid mutual interference.
The capacitance of the outputfilter capacitor must not exceed the values in the Table below to avoid startup problems and
ensure safe and reliable operation.
It’s not recommended to connect any external capacitor in the application field whenoutput loading is less than 0.5
watt.
External Capacitor Tables
Input Capacitor (Cin)
Output Capacitor (Cout)
Vin
(VDC)
5
12
24
Cin
(uF)
4.7
2.2
1
Single
Vout
(VDC)
5
9
12
15
Cout
(uF)
10
4.7
2.2
1
Dual
Vout
(Vdc)
±5
±9
±12
±15
Cout
(uF)
4.7
2.2
1
0.47
Dual
Separated
Vout (Vdc)
5/5
9/9
12/12
15/15
Cout
(uF)
4.7
2.2
1
0.47
Overload Protection
The output circuit of these products has no protection against overload. It is recommended to install external overload
protection in the form of a self-recovery fuse or a circuit breaker in series at the converter’s input.
To achieve a high degree of output voltage regulation, over-voltage, and over-current protection it is suggested to use the
AM2LV-NZ series as an alternative.
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R12.Q
Tel: +1 514 620 2722
5 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet AM2L-NZ.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AM2L-NZ | DC-DC Converter | AIMTEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |