|
|
PDF APL5537 Data sheet ( Hoja de datos )
| Número de pieza | APL5537 | |
| Descripción | Dual Channel 300mA Low Dropout Linear Regulator | |
| Fabricantes | ANPEC | |
| Logotipo |  |
|
1. APL5537  Hay una vista previa y un enlace de descarga de APL5537 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
APL5537
Dual Channel 300mA Low Dropout Linear Regulator
Features
• Dual Regulator Outputs
• Low Dropout Voltage: Typical 240mV at 300mA
• Wide Input Voltage Range: 2.5V to 5.5V
• Low Quiescent Current: Typical 58µA
• High PSRR: 70dB at 1kHz
• Low Shutdown Current: <1µA
• Shutdown Function
• Output Current-Limit Protection
• Short-Circuit Current-Limit Protection
• Over-Temperature Protection
• Lead Free and Green Devices Available
(RoHS Compliant)
General Description
The APL5537 is a dual channel low dropout linear
regulator, which operates from 2.5V to 5.5V input voltage
and delivers up to 300mA output current at each channel.
Typical dropout voltage is only 240mV at 300mA.
The APL5537 with low quiescent current, high PSRR, and
low noise is ideal for battery powered system appliances.
Other features include logic-controlled shutdown mode,
over-temperature protection, short-circuit current-limit, and
current-limit protection to ensure specified output current.
The APL5537 is available in the TSOT-23-6A and TDFN
1.6x1.6-6 packages.
Pin Configurations
Applications
• Mobile Phone
• GPS Navigation
• Blue Tooth Headset
VOUT2 1
GND 2
EN2 3
6 VOUT1 VIN 1
5 VIN EN1 2
4 EN1 EN2 3
6 VOUT1
EP 5 VOUT2
4 GND
TSOT-23-6A
(Top View)
TDFN1.6x1.6-6
(Top View)
Ordering and Marking Information
APL5537
Assembly Material
Handling Code
Temperature Range
Package Code
Voltage Code
Voltage Code
See Voltage Code Table
Package Code
CT : TSOT-23-6A
QB : TDFN1.6x1.6-6
Operating Ambient Temperature Range
I : -40 to 85oC
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
APL5537-VVCT:
APL5537-VVQB:
7VVX
7VV
X
VV - Voltage Code
X - Date Code
VV - Voltage Code
X - Date Code
Note : ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant)and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
Rev. A.7 - Oct., 2011
1
www.anpec.com.tw
1 page  
APL5537
Operating Waveforms
Refer to the typical application circuit. The test condition is VIN=VEN=4.2V, TA= 25oC. Unless otherwise specified.
Power on
Power off
VIN
1
VOUT1
2
VOUT2
3
CIN=COUT=1µF, IOUT1=IOUT2=10mA
CH1: VIN, 2V/Div, DC
CH2: VOUT1, 1V/Div, DC
CH3: VOUT2, 1V/Div, DC
TIME: 4ms/Div
VIN
1
VOUT1
2
VOUT2
3
CIN=COUT=1µF, IOUT1=IOUT2=10mA
CH1: VIN, 2V/Div, DC
CH2: VOUT1, 1V/Div, DC
CH3: VOUT2, 1V/Div, DC
TIME: 4ms/Div
Enable Response
VEN
1
VOUT1
2
VOUT2
3
CIN=COUT=1µF, IOUT1=IOUT2=10mA
CH1: VEN, 5V/Div, DC
CH2: VOUT1, 1V/Div, DC
CH3: VOUT2, 1V/Div, DC
TIME: 40µs/Div
Copyright © ANPEC Electronics Corp.
Rev. A.7 - Oct., 2011
Disable Response
VEN
1
VOUT1
2
VOUT2
3
CIN=COUT=1µF, IOUT1=IOUT2=50mA
CH1: VEN, 5V/Div, DC
CH2: VOUT1, 1V/Div, DC
CH3: VOUT2, 1V/Div, DC
TIME: 40µs/Div
5 www.anpec.com.tw
5 Page 
APL5537
Package Information
TSOT-23-6A
D
e
SEE VIEW A
b
e1
c
L
VIEW A
GAUGE PLANE
SEATING PLANE
S TSOT-23-6A
Y
M
B
MILLIMETERS
INCHES
O
L
MIN.
MAX.
MIN.
MAX.
A 0.70
1.00
0.028
0.039
A1 0.01
0.10
0.000
0.004
A2 0.70
0.90
0.028
0.035
b 0.30
0.50
0.012
0.020
c 0.08
0.20
0.003
0.008
D 2.70
3.10
0.106
0.122
E 2.60
E1 1.40
3.00
1.80
0.102
0.055
0.118
0.071
e 0.95 BSC
0.037 BSC
e1 1.90 BSC
L 0.30
0.60
0.075 BSC
0.012
0.024
0 0° 8° 0° 8°
Note : Dimension D and E1 do not include mold flash, protrusions or gate
burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil
per side.
Copyright © ANPEC Electronics Corp.
Rev. A.7 - Oct., 2011
11
www.anpec.com.tw
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet APL5537.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| APL5537 | Dual Channel 300mA Low Dropout Linear Regulator | ANPEC |
| APL5538 | Dual Channel 300mA Regulator + Reset IC | ANPEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |