DataSheet39.com

What is AD7366-5?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "Simultaneous Sampling SAR ADCs".


AD7366-5 Datasheet PDF - Analog Devices

Part Number AD7366-5
Description Simultaneous Sampling SAR ADCs
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and AD7366-5 download ( pdf file ) link at the bottom of this page.





Total 28 Pages



Preview 1 page

No Preview Available ! AD7366-5 datasheet, circuit

True Bipolar Input, 12-/14-Bit,
2-Channel, Simultaneous Sampling SAR ADCs
AD7366-5/AD7367-5
FEATURES
Dual 12-bit/14-bit, 2-channel ADCs
True bipolar analog inputs
Programmable input ranges
±10 V, ±5 V, 0 V to +10 V
±12 V with +3 V external reference
Throughput rate: 500 kSPS
Simultaneous conversion with read in less than 2 μs
High analog input impedance
Low current consumption
5.1 mA typical in normal mode
320 nA typical in shutdown mode
AD7366-5
72 dB SNR at 50 kHz input frequency
12-bit no missing codes
AD7367-5
76 dB SNR at 50 kHz input frequency
14-bit no missing codes
Accurate on-chip reference: 2.5 V ± 0.2%
–40°C to +85°C operation
High speed serial interface
SPI-/QSPI-/MICROWIRE-/DSP-compatible
iCMOS process technology
Available in a 24-lead TSSOP
GENERAL DESCRIPTION
The AD7366-5/AD7367-51 are dual, 12-/14-bit, low power,
successive approximation analog-to-digital converters (ADCs)
that feature throughput rates up to 500 kSPS. Each device contains
two ADCs, which are both preceded by a 2-channel multiplexer,
and a low noise, wide bandwidth, track-and-hold amplifier.
The AD7366-5/AD7367-5 are fabricated on the Analog
Devices, Inc., industrial CMOS process (iCMOS®)2, which is
a technology platform combining the advantages of low and
high voltage CMOS. The process allows the parts to accept
high voltage bipolar signals in addition to reducing power
consumption and package size. The AD7366-5/AD7367-5 can
accept true bipolar analog input signals in the ±10 V range,
±5 V range, and 0 V to +10 V range.
1 Protected by U.S. Patent No. 6,731,232.
2 For analog systems designers within industrial/instrumentation equipment
OEMs who need high performance ICs at higher voltage levels, iCMOS is a
technology platform that enables the development of analog ICs capable of
+30 V and operating at ±15 V supplies while allowing dramatic reductions in
power consumption and package size, and increased ac and dc performance.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
FUNCTIONAL BLOCK DIAGRAM
VDD
DCAPA
AVCC
DVCC
REF
VA1
MUX
VA2
VB1
MUX
VB2
BUF
AD7366-5/AD7367-5
T/H
T/H
BUF
12-/14-BIT
SUCCESSIVE
APPROXIMATION
ADC
OUTPUT
DRIVERS
CONTROL
LOGIC
12-/14-BIT
SUCCESSIVE
APPROXIMATION
ADC
OUTPUT
DRIVERS
DOUTA
SCLK
CNVST
CS
BUSY
ADDR
RANGE0
RANGE1
REFSEL
VDRIVE
DOUTB
AGND AGND
VSS
DCAPB
Figure 1.
DGND
The devices have an on-chip 2.5 V reference that can be disabled to
allow the use of an external reference. If a 3 V reference is applied
to the DCAPA and DCAPB pins, the AD7366-5/AD7367-5 can
accept a true bipolar ±12 V analog input. Minimum ±12 V VDD
and VSS supplies are required for the ±12 V input range.
PRODUCT HIGHLIGHTS
1. True bipolar analog input signals can be accepted, as well
as ±10 V, ±5 V, ±12 V (with external reference), and 0 V to
+10 V unipolar signals.
2. Two complete ADC functions allow simultaneous
sampling and conversion of two channels.
3. A 500 kSPS serial interface is SPI-/QSPI™-/MICROWIRE™-/
DSP-compatible.
Table 1. Related Products
Device
Resolution Throughput Rate
AD7366
12-Bit
1 MSPS
AD7366-5 12-Bit
500 kSPS
AD7367
14-Bit
1 MSPS
AD7367-5 14-Bit
500 kSPS
No. of Channels
Dual, 2-channel
Dual, 2-channel
Dual, 2-channel
Dual, 2-channel
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2007-2011 Analog Devices, Inc. All rights reserved.

line_dark_gray
AD7366-5 equivalent
AD7366-5/AD7367-5
AD7367-5 SPECIFICATIONS
AVCC = DVCC = 4.75 V to 5.25 V; VDD = 5 V to 16.5 V; VSS = −16.5 V to −5 V; VDRIVE = 2.7 V to 5.25 V; fSAMPLE = 500 kSPS; fSCLK = 20 MHz;
VREF = 2.5 V internal/external; TA = −40°C to +85°C, unless otherwise noted.
Table 3.
Parameter
DYNAMIC PERFORMANCE
Signal-to-Noise Ratio (SNR)1
Signal-to-Noise (+ Distortion) Ratio (SINAD)1
Total Harmonic Distortion (THD)1
Spurious-Free Dynamic Range (SFDR)1
Intermodulation Distortion (IMD)1
Second-Order Terms
Third-Order Terms
Channel-to-Channel Isolation1
SAMPLE AND HOLD
Aperture Delay2
Aperture Jitter2
Aperture Delay Matching2
Full Power Bandwidth
Min
74
73
DC ACCURACY
Resolution
Integral Nonlinearity (INL)1
Differential Nonlinearity (DNL)1
Positive Full-Scale Error1
14
Positive Full-Scale Error Match1
Zero Code Error1
Zero Code Error Match1
Negative Full-Scale Error1
Negative Full-Scale Error Match1
ANALOG INPUT
Input Voltage Ranges
(Programmed via RANGE Pins)
DC Leakage Current
Input Capacitance
Input Impedance
Typ Max Unit
76
75
−84 −78
−87 −79
dB
dB
dB
dB
−91 dB
−89 dB
−90 dB
40
±100
35
8
10
ns
ps
ps
MHz
MHz
Bits
±2 ±3.5 LSB
±0.5 ±0.90 LSB
±4 ±25 LSB
±5 ±25 LSB
±3 LSB
±0.2 LSB
±1 ±10 LSB
±5 ±25 LSB
±3 LSB
±0.2 LSB
±4 ±25 LSB
±5 ±25 LSB
±3 LSB
±0.2 LSB
±10 V
±0.01
9
13
500
2.5
250
1.2
±5
0 to 10
±1
V
V
μA
pF
pF
Test Conditions/Comments
fIN = 50 kHz sine wave
fa = 49 kHz, fb = 51 kHz
@ 3 dB, ±10 V range
@ 0.1 dB, ±10 V range
Guaranteed no missed codes to 14 bits
±5 V and ±10 V analog input range
0 V to 10 V analog input range
Matching from ADC A to ADC B
Channel-to-channel matching for ADC A and ADC B
±5 V and ±10 V analog input range
0 V to 10 V analog input range
Matching from ADC A to ADC B
Channel-to-channel matching for ADC A and ADC B
±5 V and ±10 V analog input range
0 V to 10 V analog input range
Matching from ADC A to ADC B
Channel-to-channel matching for ADC A and ADC B
See Table 7
When in track, ±10 V range
When in track, ±5 V or 0 V to +10 V range
For ±10 V @ 500 kSPS
For ±10 V @ 100 kSPS
For ±5 V/0 V to +10 V @ 500 kSPS
For ±5 V/0 V to +10 V @ 100 kSPS
Rev. B | Page 5 of 28


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AD7366-5 electronic component.


Information Total 28 Pages
Link URL [ Copy URL to Clipboard ]
Product Image
and Detail view

AD7366-5 datasheet


1. 12-Bit, Simultaneous Sampling SAR ADC

[ Learn More ]




Download [ AD7366-5.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AD7366-5The function is Simultaneous Sampling SAR ADCs. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AD73     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search