DataSheet39.com

What is 83056?

This electronic component, produced by the manufacturer "IDT", performs the same function as "Single-Ended Multiplexer".


83056 Datasheet PDF - IDT

Part Number 83056
Description Single-Ended Multiplexer
Manufacturers IDT 
Logo IDT Logo 


There is a preview and 83056 download ( pdf file ) link at the bottom of this page.





Total 15 Pages



Preview 1 page

No Preview Available ! 83056 datasheet, circuit

6:1, Single-Ended Multiplexer
83056
Data Sheet
GENERAL DESCRIPTION
The 83056 is a low skew, 6:1, Single-ended Multi-
plexer from IDT. The 83056 has six selectable single-
ended clock inputs and one single-ended clock output. The
output has a V pin which may be set at 3.3V, 2.5V, or
DDO
1.8V, making the device ideal for use in voltage transla-
tion applications. An output enable pin places the output in
a high impedance state which may be useful for testing or
debug purposes. The device operates up to 250MHz and is pack-
aged in a 16 TSSOP package.
FEATURES
• 6:1 single-ended multiplexer
• Q nominal output impedance: 7Ω (V = 3.3V)
DDO
• Maximum output frequency: 250MHz
• Propagation delay: 3ns (maximum), V = V = 3.3V
DD DDO
• Input skew: 225ps (maximum), V = V = 3.3V
DD DDO
• Part-to-part skew: 475ps (maximum), V = V = 3.3V
DD DDO
• Additive phase jitter, RMS: 0.19ps (typical), 3.3V/3.3V
• Operating supply modes:
V /V
DD DDO
3.3V/3.3V
3.3V/2.5V
3.3V/1.8V
2.5V/2.5V
2.5V/1.8V
• -40°C to 85°C ambient operating temperature
• Available in lead-free (RoHS 6) package
BLOCK DIAGRAM
CLK0
CLK1
CLK2
CLK3
CLK4
CLK5
SEL2
SEL1
SEL0
OE
PIN ASSIGNMENT
Q
83056
16-Lead TSSOP
4.4mm x 5.0mm x 0.92mm package body
G Package
Top View
©2016 Integrated Device Technology, Inc
1
Revision B March 10, 2016

line_dark_gray
83056 equivalent
83056 Data Sheet
TABLE 5B. AC CHARACTERISTICS, V = 3.3V ± 5%, V = 2.5V ± 5%, TA = -40°C TO 85°C
DD DDO
Symbol Parameter
Test Conditions
Minimum Typical Maximum
f
MAX
tp
LH
tp
HL
tsk(i)
Output Frequency
Propagation Delay, Low to High; NOTE 1
Propagation Delay, High to Low; NOTE 1
Input Skew; NOTE 2
250
2.5 2.8 3.1
2.6 2.8 3.0
45 150
Buffer Additive Phase Jitter, RMS;
tjit refer to Additive Phase Jitter Section;
NOTE 3
155.52MHz,
(12kHz to 20MHz)
0.14
tsk(pp) Part-to-Part Skew; NOTE 2, 4
400
t /t
RF
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
50
45
500
55
MUX MUX Isolation
ISOL
@ 100MHz
45
NOTE 1: Measured from V /2 of the input to V /2 of the output.
DD DDO
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Driving only one input clock.
NOTE 4: Defined as skew between outputs on different devices operating a the same supply voltages and
with equal load conditions. Using the same type of input on each device, the output is measured at V /2.
DDO
Units
MHz
ns
ns
ps
ps
ps
ps
%
dB
TABLE 5C. AC CHARACTERISTICS, V = 3.3V ± 5%, V = 1.8V ± 5%, TA = -40°C TO 85°C
DD DDO
Symbol Parameter
Test Conditions
Minimum Typical Maximum
f
MAX
tp
LH
tp
HL
tsk(i)
Output Frequency
Propagation Delay, Low to High; NOTE 1
Propagation Delay, High to Low; NOTE 1
Input Skew; NOTE 2
250
2.7 3.2 3.8
2.8 3.3 3.8
50 150
Buffer Additive Phase Jitter, RMS;
tjit refer to Additive Phase Jitter Section;
NOTE 3
155.52MHz,
(12kHz to 20MHz)
0.16
tsk(pp) Part-to-Part Skew; NOTE 2, 4
475
t /t
RF
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
100
45
700
55
MUX MUX Isolation
ISOL
@ 100MHz
45
NOTE 1: Measured from V /2 of the input to V /2 of the output.
DD DDO
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Driving only one input clock.
NOTE 4: Defined as skew between outputs on different devices operating a the same supply voltages and
with equal load conditions. Using the same type of input on each device, the output is measured at V /2.
DDO
Units
MHz
ns
ns
ps
ps
ps
ps
%
dB
©2016 Integrated Device Technology, Inc
5
Revision B March 10, 2016


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 83056 electronic component.


Information Total 15 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 83056.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
8305The function is Connector Modules with Intergrated LAN Magnetics. ETCETC
83054The function is Single-Ended Multiplexer. IDTIDT
83056The function is Single-Ended Multiplexer. IDTIDT

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

8305     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search