5P83908 Datasheet PDF - IDT
Part Number | 5P83908 | |
Description | High-Performance 1.8V/2.5V/3.3V Crystal Input to LVCMOS Clock Fanout Buffer | |
Manufacturers | IDT | |
Logo | ||
There is a preview and 5P83908 download ( pdf file ) link at the bottom of this page. Total 18 Pages |
Preview 1 page No Preview Available ! High-Performance 1.8V/2.5V/3.3V Crystal
Input to LVCMOS Clock Fanout Buffer with OE
5P8390x
DATASHEET
Description
The 5P8390x is a high performance, 1-to-4/6/8 crystal input to
LVCMOS fanout buffer with output enable pins. This device
accepts a fundamental mode crystal from 10MHz to 40MHz
and outputs LVCMOS clocks with best-in-class phase noise
performance.
The 5P8390x family (5P83904, 5P83905, and 5P83908)
features a synchronous glitch-free Output Enable function to
eliminate any intermediate incorrect output clock cycles when
enabling or disabling outputs. It comes in standard TSSOP
packages or small QFN packages and can operate from 1.8V
to 3.3V supplies.
5P83904 Block Diagram
Features
• 4/6/8 copies of LVCMOS output clocks with best-in-class
phase noise performance
• Phase Noise:
Offset Noise Power (3.3V)
• 100Hz: -131 dBc/Hz
• 1KHz: -145 dBc/Hz
• 10KHz: -154 dBc/Hz
• 100KHz: -161 dBc/Hz
• Operating power supply modes:
• Full 3.3V, 2.5V, 1.8V
• Mixed 3.3V core/2.5V output operating supply
• Mixed 3.3V core/1.8V output operating supply
• Mixed 2.5V core/1.8V output operating supply
• Crystal Oscillator Interface
• Synchronous Output Enable
• Packaged in 16-, 20-pin TSSOP and QFN packages (Pb
free, fully RoHS compliant)
• Extended (-40°C to +105°C) temperature range
XTAL_IN
XTAL_OUT
ENABLE1
OSC
SYNC1
ENABLE2
SYNC2
CLK0
CLK1
CLK2
CLK3
5P8390x OCTOBER 5, 2016
1 ©2016 Integrated Device Technology, Inc.
|
|
5P8390x DATASHEET
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the 5P8390x. These ratings, which are standard values
for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions
above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating
conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended
operating temperature range.
Item
Supply Voltage, VDD
Output Enable and All Outputs
CLKIN
Ambient Operating Temperature (extended)
Storage Temperature
Junction Temperature
Soldering Temperature
Rating
3.465V
-0.4 V to VDD+0.5 V
-0.4 V to 3.465V
-40 to +105°C
-65 to +150°C
125C
260C
Recommended Operation Conditions
Parameter
Ambient Operating Temperature (extended)
Power Supply Voltage (measured in respect to GND)
Min.
-40
+1.71
Typ.
Max.
+105
+3.465
Units
C
V
DC Electrical Characteristics
(VDD = 1.8V, 2.5V, 3.3V)
VDD=1.8V ±5% , Ambient temperature -40° to +105°C, unless stated otherwise
Parameter
Input High Voltage
Input Low Voltage
Output High Voltage
Output Low Voltage
Nominal Output Impedance
Operating Supply Current
5P83904
5P83905
5P83908
Symbol
VIH
VIL
VOH
VOL
ZO
Conditions
XTAL_IN, ENABLE1/2 pins
XTAL_IN, ENABLE1/2 pins
IOH = -4 mA
IOL = 4 mA
Min.
0.7xVDD
1.65
0.03
Outputs On, 25MHz with No Load
IDD Outputs On, 25MHz with No Load
Outputs On, 25MHz with No Load
Typ.
14
8.9
9.0
9.2
Max.
0.3xVDD
1.85
0.05
Units
V
V
V
V
mA
OCTOBER 5, 2016
5 HIGH-PERFORMANCE 1.8V/2.5V/3.3V CRYSTAL INPUT TO LVCMOS CLOCK FANOUT BUFFER WITH OE
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 5P83908 electronic component. |
Information | Total 18 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ 5P83908.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
5P83904 | The function is High-Performance 1.8V/2.5V/3.3V Crystal Input to LVCMOS Clock Fanout Buffer. IDT | |
5P83905 | The function is High-Performance 1.8V/2.5V/3.3V Crystal Input to LVCMOS Clock Fanout Buffer. IDT | |
5P83908 | The function is High-Performance 1.8V/2.5V/3.3V Crystal Input to LVCMOS Clock Fanout Buffer. IDT | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
5P83
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |