DataSheet39.com

What is WS9256?

This electronic component, produced by the manufacturer "Winsemi", performs the same function as "High Precision PSR Constant Current LED Driver".


WS9256 Datasheet PDF - Winsemi

Part Number WS9256
Description High Precision PSR Constant Current LED Driver
Manufacturers Winsemi 
Logo Winsemi Logo 


There is a preview and WS9256 download ( pdf file ) link at the bottom of this page.





Total 8 Pages



Preview 1 page

No Preview Available ! WS9256 datasheet, circuit

WS9256ProductDescription
High Precision PSR Constant Current LED Driver
Features
Built-in 650V Power MOSFET
Constant current control without secondary sense and
feedback circuit.
±3% LED current accuracy
Ultra low operating current to improve efficiency
High resistance feedback resistor to improve efficiency
Universal input voltage
LED short and open circuit protection
VCC under-voltage protection
Feedback loop short circuit protection
Current sense resistor open circuit protection
Over temperature protection
No external loop compensation component required
Available in DIP-7 package
Applications
LED bulb light
Other LED lighting
Description
The WS9256 is a high precision primary-side
feedback and regulation controller for LED lighting, it
operates in constant current control mode and is designed
to work in inductor current discontinuous conduction mode
and extremely suitable for flyback convertor under
universal input, the output power of system should be less
than 24W.
The WS9256 integrates 650V power MOSFET. Since
adopting primary sense and feedback control technology,
the secondary sense and feedback circuit is eliminated.
The loop compensation components are also removed
while maintaining stability overall operating conditions. The
low component counts and low BOM cost are realized.
Since using the proprietary high accurate current
sense method, the WS9256 realizes ±3% accuracy of LED
current along with excellent line regulation and load
regulation.
The WS9256 offers rich protection functions including
LED short circuit protection, LED open circuit protection,
die over-temperature protection, VCC over voltage
protection, VCC under voltage protection and FB short
circuit protection. All the protection features are
auto-recovery.
Typical Application
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
Copyright@WinsemiMicroelectronics Co.,Ltd.,All rightreserved.
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
1209

line_dark_gray
WS9256 equivalent
WS9256ProductDescription
Application Information
The WS9256 is a high performance power switch
specially designed for LED lighting, it uses the patent
constant current control technology of WINSEMI. The
WS9256 integrates a 650V power MOSFET. The accurate
LED current can be realized without opto-coupler and TL431
feedback circuit while minimizing the external component
count, lowering the total bill of material cost.
Start Up
The VCC capacitor will be charged through the start-up
resistor when the system is powered on, once the voltage
on VCC reaches the start-up threshold, the WS9256 will
start to operate, and then the VCC is supplied by the
auxiliary winding.
Constant Current Control
Cycle-by-Cycle current sense is offered in WS9256, the
CS is connected to the current sense comparator, and the
voltage on CS will be compared with the internal 508mV
reference voltage, the MOSFET will be switched off when
the voltage on CS reaches the threshold. The output of the
comparator also includes a 500nS leading edge blanking
time
The primary peak current is given by:
I P_PK
508 (mA)
RCS
The current in LED can be calculated by the equation:
I OUT
I P_PK
4
NP
NS
Where,
NP: primary winding turns of transformer
NS: secondary winding turns of transformer
IP_PK: peak current in MOSFET
The ratio of FB upper resistor to lower resistor is
recommended to about 4.0. The FB upper resistor can be
set to 300KΩ~750KΩ to improve efficiency of convertor.
Operation Switching Frequency
The WS9256 is designed to work in discontinuous
conduction mode and no external loop compensation
component is required while maintaining stability. The
maximum duty cycle is limited to 42%. The maximum
switching frequency should be set to less than 100KHz and
the minimum switching frequency should be set to more
than 20KHz. The maximum and minimum switching
frequency is limited in WS9256 to ensure the stability of
system.
The switching frequency can be set by the formula:
f
8
Np2 VLED
Ns2 Lp ILED
Where, LP is the primary winding inductance of
transformer.
Protection Function
The WS9256 has several protection functions. The
internal MOSFET will be shut down immediately when the
voltage on VCC reaches the threshold of OVP and the
device will not recover until the protection condition is
removed. A 18V zener diode is designed in the WS9256 to
prevent the chip damage from the abnormal situation.
The thermal protection circuitry in the WS9256 senses
the die temperature after start up, and the thermal protection
threshold is set to 147
The system will work in low consumption mode when
the output LED short circuit or open circuit is detected.
While the WS9256 continuous to detect output status until
the LED recover to normal condition, and then the device
will be operate in normal mode.
Feedback Network
The WS9256 senses the output information through the
feedback network and the FB threshold voltage is set to 1V.
PCB Layout
The following rules should be followed in WS9256 PCB
layout:
www.wWIiNnSsEMeImMi.IcCRoOmELECTTReOlN:IC+S86-7W5IN5S-E8M2I50MI6C2RO8E8LECTRFOaNxICS: +86W-7IN5S5EM-8I 2M50ICR6O2E9LE9CTRONICS
WINSEMI MICROELECTRONICS
5/8WINSEMI MICROELECTRONICS


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for WS9256 electronic component.


Information Total 8 Pages
Link URL [ Copy URL to Clipboard ]
Download [ WS9256.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
WS9252The function is High Precision PSR Constant Current LED Driver. WinsemiWinsemi
WS9254The function is High Precision PSR Constant Current LED Driver. WinsemiWinsemi
WS9256The function is High Precision PSR Constant Current LED Driver. WinsemiWinsemi

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

WS92     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search