|
|
PDF Si3993CDV Data sheet ( Hoja de datos )
| Número de pieza | Si3993CDV | |
| Descripción | Dual P-Channel 30 V (D-S) MOSFET | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de Si3993CDV (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
New Product
Dual P-Channel 30 V (D-S) MOSFET
Si3993CDV
Vishay Siliconix
PRODUCT SUMMARY
VDS (V)
- 30
RDS(on) ()
0.111 at VGS = - 10 V
0.188 at VGS = - 4.5 V
ID (A)a
- 2.9
- 2.2
Qg (Typ.)
2.7 nC
TSOP-6
Top View
G1 1 6 D1
FEATURES
• Halogen-free According to IEC 61249-2-21
Definition
• TrenchFET® Power MOSFET
• 100 % Rg Tested
• Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
• Load Switch for Portable Applications
• Battery Switch for Portable Devices
• Computers
- Bus Switch
- Load Switch
S1
S2
3 mm S2
G2
25
34
2.85 mm
S1
D2
Marking Code
MJ XXX
Lot Traceability
and Date Code
Part # Code
Ordering Information: Si3993CDV-T1-GE3 (Lead (Pb)-free and Halogen-free)
G1 G2
D1
P-Channel MOSFET
D2
P-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
Parameter
Symbol
Limit
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current (TJ = 150 °C)
Pulsed Drain Current
TC = 25 °C
TC = 70 °C
TA = 25 °C
TA = 70 °C
Continuous Source-Drain Diode Current
TC = 25 °C
TA = 25 °C
TC = 25 °C
Maximum Power Dissipation
TC = 70 °C
TA = 25 °C
TA = 70 °C
Operating Junction and Storage Temperature Range
VDS
VGS
ID
IDM
IS
PD
TJ, Tstg
- 30
± 20
- 2.9
- 2.3
- 2.6b, c
- 2.1b, c
-8
- 1.17
- 0.95b, c
1.4
0.9
1.14b, c
0.73b, c
- 55 to 150
Unit
V
A
W
°C
THERMAL RESISTANCE RATINGS
Parameter
Maximum Junction-to-Ambientb, d
t5s
Maximum Junction-to-Foot
Steady State
Notes:
a. TC = 25 °C.
b. Surface mounted on 1" x 1" FR4 board.
c. t = 5 s.
d. Maximum under steady state conditions is 150 °C/W.
Symbol
RthJA
RthJF
Typical
93
75
Maximum
110
90
Unit
°C/W
Document Number: 67331
S11-0240-Rev. A, 14-Feb-11
www.vishay.com
1
1 page  
New Product
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
3
Si3993CDV
Vishay Siliconix
2
2
1
0
0 25 50 75 100 125 150
TC - Case Temperature (°C)
Current Derating*
2 1.0
0.8
1.5
0.6
1
0.4
0.5
0.2
0
0 25 50 75 100 125 150
TC - Case Temperature (°C)
Power Derating, Junction-to-Case
0.0
0
25 50 75 100 125 150
TA - Ambient Temperature (°C)
Power Derating, Junction-to-Ambient
* The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper
dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package
limit.
Document Number: 67331
S11-0240-Rev. A, 14-Feb-11
www.vishay.com
5
5 Page 
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet Si3993CDV.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| Si3993CDV | Dual P-Channel 30 V (D-S) MOSFET | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |