AH101-G Datasheet PDF - TriQuint Semiconductor
Part Number | AH101-G | |
Description | High Linearity Amplifier | |
Manufacturers | TriQuint Semiconductor | |
Logo | ||
There is a preview and AH101-G download ( pdf file ) link at the bottom of this page. Total 7 Pages |
Preview 1 page No Preview Available ! Applications
• Mobile Infrastructure
• CATV / DBS
• Defense / Homeland Security
Product Features
• 50 – 1500 MHz
• +47 dBm Output IP3
• 13.5 dB Gain
• +26.5 dBm P1dB
• MTTF > 1000 Years
• Internally Matched
• Single +9 V Supply
• Lead-free/RoHS-compliant SOT-89 Package
AH101-G
Medium Power, High Linearity Amplifier
AH101
SOT-89 Package
Functional Block Diagram
GND
4
1
RF IN
2
GND
3
RF OUT
General Description
The AH101-G is a medium power gain block that offers
excellent dynamic range in a low-cost surface mount
package. The combination of a single supply voltage
and an internally matched device makes it ideal for both
narrow and broadband applications. Only dc blocking
and bypass capacitors as well as an RF choke are
required for operation.
Superior thermal design allows the product to achieve
+46 dBm IP3 performance at a mounting temperature of
+85°C with an associated MTTF of greater than 1000
years.
This broadband amplifier uses a high reliability GaAs
MESFET technology and is targeted for applications
where high linearity is required. The AH101-G is
available in the environmentally-friendly green/RoHS-
compliant SOT-89 package.
Pin Configuration
Pin No.
1
3
2, 4
Label
RF In
RF Out
GND
Not Recommended for
New Designs
Recommended Replacement Part:
TQP7M9102
Datasheet: Rev B 08-12-13
© 2013 TriQuint
Ordering Information
Part No.
AH101-G
Description
Med. Power High Linearity Amplifier
Standard T/R size = 1000 pieces on a 7” reel
- 1 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com
|
|
Pin Configuration and Description
AH101-G
Medium Power, High Linearity Amplifier
GND
4
1
RF IN
2
GND
3
RF OUT
Pin No.
1
3
2, 4
Label
RF In
RF Out
GND
Description
RF input, matched to 50 ohms. External DC Block is required.
RF output / DC supply, matched to 50 ohms. External DC Block, bias choke required.
Backside Paddle. Multiple vias should be employed to minimize inductance and thermal
resistance; see PCB mounting pattern in Mechanical Information section.
Evaluation Board PCB Information
TriQuint PCB 1075825 Material and Stack-up
0.014"
0.062" ± 0.006"
Finished Board
Thickness
0.014"
Nelco N-4000-13
1 oz. Cu top layer
1 oz. Cu inner layer
Nelco N-4000-13
εr=3.9 typ.
Nelco N-4000-13
1 oz. Cu inner layer
1 oz. Cu bottom layer
50 ohm line dimensions: width = 0.029”, spacing = 0.035”
Datasheet: Rev B 08-12-13
© 2013 TriQuint
- 5 of 7 -
Disclaimer: Subject to change without notice
www.triquint.com
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AH101-G electronic component. |
Information | Total 7 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ AH101-G.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
AH101-G | The function is High Linearity Amplifier. TriQuint Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AH10
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |