DataSheet39.com

What is MCP8063?

This electronic component, produced by the manufacturer "Microchip", performs the same function as "3-Phase Brushless Sinusoidal Sensorless Motor Driver".


MCP8063 Datasheet PDF - Microchip

Part Number MCP8063
Description 3-Phase Brushless Sinusoidal Sensorless Motor Driver
Manufacturers Microchip 
Logo Microchip Logo 


There is a preview and MCP8063 download ( pdf file ) link at the bottom of this page.





Total 20 Pages



Preview 1 page

No Preview Available ! MCP8063 datasheet, circuit

MCP8063
3-Phase Brushless Sinusoidal Sensorless Motor Driver
Features
• Automotive AEC-Q100 Qualified, PPAP available
upon request
• Position Sensorless BLDC Drivers (no Hall
Sensor required)
• 180° Sinusoidal Drive for High Efficiency and Low
Acoustic Noise
• Supports 2V to 14V Power Supplies
• Speed Control through Power Supply Modulation
(PSM) and/or Pulse-Width Modulation (PWM)
• Built-In Frequency Generator (FG output signal)
• Built-In Lock-Up Protection and Automatic
Recovery Circuit (external capacitor not
necessary)
• Built-In Overcurrent Limitation (1.5A)
• Built-In Overvoltage Protection
• Built-In Thermal Shutdown Protection
• Thermally Enhanced 8-Lead 4 mm x 4 mm DFN
Package with Exposed Pad
• 23 kHz PWM Output Frequency
• No External Tuning Required
• Optimized for Fan Cooling Systems
Typical Applications
• Silent Notebook CPU/GPU Cooling Fans
• Air Ventilation System
• 12V 3-Phase BLDC Motors
Description
The MCP8063 device is a highly integrated 3-phase,
full-wave sensorless driver for brushless motors. It
features a 180° sinusoidal drive, high torque output,
and silent drive. Its integrated features and the wide
power supply range (2V to 14V) make the MCP8063 an
ideal candidate for a broad range of motor
characteristics, requiring no external tuning. Speed
control can be achieved through either power supply
modulation (PSM) or pulse-width modulation (PWM).
Due to the compact packaging and minimum bill of
materials (power transistors integrated, no Hall sensor,
no external tuning), the MCP8063 is optimized for fan
applications that require high efficiency and low
acoustic noise at competitive costs. Frequency
generator output enables precision speed control in
closed-loop applications. The MCP8063 driver
includes a Lock-Up Protection mode, which turns off
the output current when the motor is under lock
condition, and an automatic recovery that enables the
fan to restart when the lock condition is removed.
Features such as motor overcurrent limitation and
thermal shutdown protection improve motor system
reliability without additional efforts from design
engineers.
The MCP8063 is available in a compact
thermally-enhanced 8-lead 4 mm x 4 mm DFN
package with exposed pad.
Package Types
MCP8063
4x4 DFN*
FG 1
8 PWM
VBIAS 2 EP 7 VDD
OUT1 3 9 6 OUT3
OUT2 4
5 GND
Top View
* Includes Exposed Thermal Pad (EP); see Table 3-1.
2014 Microchip Technology Inc.
DS20005257B-page 1

line_dark_gray
MCP8063 equivalent
MCP8063
ELECTRICAL CHARACTERISTICS (CONTINUED)
Electrical Specifications: Unless otherwise specified, all limits are established for VDD = 12.0V,
Temperature = +25°C.
Parameters
Sym.
Min.
Typ.
Max.
Units
Conditions
Thermal Shutdown TSD — 170 — °C
Thermal Shutdown
TSD_HYS
25
— °C
Hysteresis
Input Over Voltage
VOV
18.5
V
Note 1: Minimum and maximum parameter is not production tested and is specified by design and validation.
Reference PCB, according to JEDEC standard EIA/JESD 51-9.
TEMPERATURE SPECIFICATIONS
Electrical Specifications: Unless otherwise specified, all limits are established for VDD = 12.0V, TA = +25°C.
Parameters
Sym. Min. Typ. Max. Units
Conditions
Temperature Ranges
Operating Temperature
Storage Temperature Range
TOPR
TSTG
-40
-55
— +125
— +150
°C
°C
Package Thermal Resistances
Thermal Resistance, 8LD 4x4 DFN
JA
48
— °C/W
JC — 7 — °C/W
Note 1: Minimum and maximum parameter is not production tested and is specified by design and validation.
Derating applies for ambient temperatures outside the specified operating range (refer to Figure 1-1).
2.5
DFN-8
2
1.5
1
0.5
0
FIGURE 1-1:
TA (°C)
Allowable Power Dissipation (PD_MAX) as a Function of Ambient Temperature (TA).
2014 Microchip Technology Inc.
DS20005257B-page 5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MCP8063 electronic component.


Information Total 20 Pages
Link URL [ Copy URL to Clipboard ]
Download [ MCP8063.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
MCP8063The function is 3-Phase Brushless Sinusoidal Sensorless Motor Driver. MicrochipMicrochip

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

MCP8     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search