|
|
PDF LTPL-C034UVD375 Data sheet ( Hoja de datos )
| Número de pieza | LTPL-C034UVD375 | |
| Descripción | C03 UV LED | |
| Fabricantes | LITE-ON Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LTPL-C034UVD375 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
Specific Lighting
Product Data Sheet
LTPL-C034UVD375
Spec No.: DS23-2016-0074
Effective Date: 09/03/2016
Revision: -
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
1 page  
5. Bin Code List
Specific Lighting
LTPL-C034UVD375
Vf Bin
V0
V1
V2
V3
Φe Bin
R2
R3
R4
R5
R6
R7
Vf : Forward Voltage Spec. Table
Vf (V) @ If = 350mA
Min.
2.8
3.2
3.6
4.0
Forward Voltage Tolerance: +/- 0.1 V
Max.
3.2
3.6
4.0
4.4
Φe Radiant Flux Spec. Table
Φe (mW) @ If = 350mA
Min. Max.
350 380
380 410
410 440
440 470
470 500
500 530
Radiant Flux Tolerance: +/- 10%
Wp Bin
P3P
P3Q
Wp: Peak Wavelength Spec table
Wp (nm) @ If = 350mA
Min.
370
375
Peak Wavelength Tolerance: +/- 3nm
Max.
375
380
Notes:
Bin classification code is marked on each packing bag.
4/15
Part No. : LTPL-C034UVD375
BNS-OD-FC002/A4
5 Page 
Recommend Printed Circuit Board Attachment Pad
Specific Lighting
LTPL-C034UVD375
Notes:
1. The LEDs can be soldered using the reflow soldering or hand soldering method. The recommended hand
soldering condition is 300°C max. and 2secs max. only once, and the operation of reflow soldering is only up to
three times at maximum.
2. All temperatures refer to topside of the package, measured on the package body surface.
3. The soldering profile could be further referred to different soldering grease material characteristic. The grease
vendor will provide this information.
4. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature.
5. Although the recommended reflow conditions are specified above, the reflow or hand soldering condition at
the lowest possible temperature is desirable for the LEDs.
6. LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip soldering
method.
10/15
Part No. : LTPL-C034UVD375
BNS-OD-FC002/A4
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet LTPL-C034UVD375.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LTPL-C034UVD375 | C03 UV LED | LITE-ON Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |