|
|
PDF IDT6116SA Data sheet ( Hoja de datos )
| Número de pieza | IDT6116SA | |
| Descripción | CMOS Static RAM | |
| Fabricantes | Integrated Device Technology | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IDT6116SA (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
CMOS Static RAM
16K (2K x 8-Bit)
IDT6116SA
IDT6116LA
Features
◆ High-speed access and chip select times
– Military: 20/25/35/45/55/70/90/120/150ns (max.)
– Industrial: 20/25ns (max.)
– Commercial: 15/20/25ns (max.)
◆ Low-power consumption
◆ Battery backup operation
– 2V data retention voltage (LA version only)
◆ Produced with advanced CMOS high-performance
technology
◆ CMOS process virtually eliminates alpha particle soft-error
rates
◆ Input and output directly TTL-compatible
◆ Static operation: no clocks or refresh required
◆ Available in ceramic 24-pin DIP, ceramic and plastic 24-pin Thin
Dip and 24-pin SOIC
◆ Military product compliant to MIL-STD-833, Class B
Description
The IDT6116SA/LA is a 16,384-bit high-speed static RAM organized
as 2K x 8. It is fabricated using high-performance, high-reliability CMOS
technology.
Access times as fast as 15ns are available. The circuit also offers a
reduced power standby mode. When CS goes HIGH, the circuit will
automaticallygoto,andremainin,astandbypowermode,aslongas CS
remains HIGH. This capability provides significant system level power and
coolingsavings. Thelow-power(LA)versionalsooffersabatterybackup
data retention capability where the circuit typically consumes only 1µW to
4µW operating off a 2V battery.
All inputs and outputs of the IDT6116SA/LA are TTL-compatible. Fully
static asynchronous circuitry is used, requiring no clocks or refreshing for
operation.
The IDT6116SA/LA is packaged in 24-pin 300mil plastic DIP, 24-pin
600mil and 300mil ceramic DIP, or 24-lead gull-wing SOIC providing high
board-level packing densities.
Militarygradeproductismanufacturedincomplianceto MIL-STD-883,
Class B, making it ideally suited to military temperature applications
demanding the highest level of performance and reliability.
Functional Block Diagram
A0
A10
I/O0
I/O7
CS
OE
WE
ADDRESS
DECODER
INPUT
DATA
CIRCUIT
CONTROL
CIRCUIT
128 X 128
MEMORY
ARRAY
I/O CONTROL
VCC
GND
,
3089 drw 01
©2013 Integrated Device Technology, Inc.
1
FEBRUARY 2013
DSC-3089/08
1 page  
IDT6116SA/LA
CMOS Static RAM 2K (16K x 8-Bit)
Low VCC Data Retention Waveform
Military, Commercial, and Industrial Temperature Ranges
DATA RETENTION MODE
VCC
4.5V
VDR ≥ 2V
4.5V
tCDR
CS
VIH
VDR
tR
,VIH
3089 drw 03
AC Test Conditions
Input Pulse Levels
Input Rise/Fall Times
Input Timing Reference Levels
Output Reference Levels
AC Test Load
GND to 3.0V
5ns
1.5V
1.5V
See Figures 1 and 2
3089 tbl 11
5V
5V
480Ω
480Ω
DATAOUT
DATAOUT
255Ω
30pF*
,
Figure 1. AC Test Load
3089 drw 04
*Including scope and jig.
255Ω
,5pF*
3089 drw 05
Figure 2. AC Test Load
(for tOLZ, tCLZ, tOHZ, tWHZ, tCHZ & tOW)
6.452
5 Page 
IDT6116SA/LA
CMOS Static RAM 2K (16K x 8-Bit)
Military, Commercial, and Industrial Temperature Ranges
Datasheet Document History
01/07/00
08/09/00
02/01/01
12/30/03
03/31/05
11/15/06
04/26/11
05/01/13
Pg. 1, 3, 4, 10
Pg. 9, 10
Pg. 11
Pg. 3,10
Pg. 10
Pg. 3
Pg.4
Pg.1,2,3,4,6,10
Pg. 1
Pg. 3
Pg. 10
Updated to new format
Added Industrial Temperature range offerings
Separated ordering information into military, commercial, and industrial temperature range offerings
Added Datasheet Document History
Not recommended for new designs
Removed "Not recommended for new designs"
Corrected Industrial temp from -45C to -40C.
Added "Restricted hazardous substance device" to ordering information.
Changed power limits for commercial and industrial on speed grades 25ns and 35ns.
Changed power limits for commercial and industrial on speed grade 45ns. Refer to
PCN SR-0602-02.
Updated "Restricted hazardous substance device" to "Green". Obsoleted 24-pin SOJ, 24-pin 600 mil
and 35ns, 45ns for Industrial & Commercial.
Description paragraph 4, package information. Changed text to read "The IDT6116SA/LA is packaged
in 24-pin 300mil plastic DIP, 24-pin 600mil and 300mil ceramic DIP, or 24-lead gull-wing SOIC providing
high board-level packing densities". Removed IDT in reference to fabrication.
Updated DC Elec Chars (VCC = 5.0V ± 10%) table by adding industrial to the Test Conditions.
Updated DC Elec Chars (VCC = 5.0V ± 10%, VLC = 0.2V, VHC + VCC- 0.2V) table by removing the LA power
for the 15ns speed.
Removed footnote "*Available in 300mil packaging only" from the Military ordering information.
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Road
San Jose, CA 95138
for SALES:
800-345-7015 or
408-284-8200
fax: 408-284-2775
www.idt.com
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
6.1412
for Tech Support:
408-284-4532
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet IDT6116SA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IDT6116SA | CMOS Static RAM | Integrated Device Technology |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |