No Preview Available !
LM193W, LM293W, LM393W
Low power dual voltage comparators
Features
■ Wide single supply voltage range or dual
supplies: +2 V to +36 V or ±1 V to ±18 V
■ Very low supply current (0.4 mA) independent
of supply voltage (1 mW/comparator at +5 V)
■ Low input bias current: 25 nA typ
■ Low input offset current: ±5 nA typ
■ Low input offset voltage: ±1 mV typ
■ Input common-mode voltage range includes
ground
■ Low output saturation voltage: 250 mV typ.
(Io = 4 mA)
■ Differential input voltage range equal to the
supply voltage
■ TTL, DTL, ECL, MOS, CMOS compatible
outputs
■ ESD internal protection: 2 kV
Description
These devices consist of two independent low
voltage comparators designed specifically to
operate from a single supply over a wide range of
voltages. Operation from split power supplies is
also possible.
These comparators also have a unique
characteristic in that the input common-mode
voltage range includes ground even though
operated from a single power supply voltage.
All the pins are protected against electrostatic
discharge up to 2 kV. As a consequence, the input
voltages must not exceed the magnitude of VCC+
or VCC-.
DIP8
(Plastic package)
SO8
(Plastic micropackage)
TSSOP8
(Thin shrink small outline package)
Pin connections
(Top view)
1 - Output 1
2 - Inverting input 1
3 - Non-inverting input 1
4 - VCC-
5 - Non-inverting input 2
6 - Inverting input 2
7 - Output 2
8 - VCC+
December 2008
Rev 2
1/15
www.st.com
15
LM193W, LM293W, LM393W
Figure 2. Supply current versus supply
voltage
Electrical characteristics
Figure 3. Input current versus supply voltage
Figure 4. Output saturation voltage versus Figure 5. Response time for various input
output current
overdrives - negative transition
Figure 6. Response time for various input
overdrives - positive transition
5/15