DataSheet39.com

What is 0805USBF-372MRB?

This electronic component, produced by the manufacturer "Coilcraft", performs the same function as "Low Profile USB Common Mode Choke".


0805USBF-372MRB Datasheet PDF - Coilcraft

Part Number 0805USBF-372MRB
Description Low Profile USB Common Mode Choke
Manufacturers Coilcraft 
Logo Coilcraft Logo 


There is a preview and 0805USBF-372MRB download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! 0805USBF-372MRB datasheet, circuit

Document 1270-1
Low Profile USB Common Mode Choke 0805
• For noise suppression in super high speed signal lines: USB
3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high
speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
• Suitable for USB-type C specification 1.0
• Up to 6 GHz differential mode 3 dB cutoff frequency; up to
30 dB common mode noise attenuation in GHz range
Core material Ferrite
Environmental  RoHS compliant
Terminations  Matte tin over nickel over silver-platinum-glass frit.
Weight  14.7 – 15.5 mg
Ambient temperature  –40°C to +125°C with Irms current.
­Maximum part temperature 140°C
Storage temperature  Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7reel; 7500/13reel;  Plastic tape:  8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.295 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Common mode
impedance typ (Ohms)
10 MHz 100 MHz 500 MHz
Common mode
attenuation typ (dB) Inductance2 DCR max3 Isolation Irms4
10 MHz 100 MHz 500 MHz min (nH) (Ohms) (Vrms) (mA)
0805USBF-421MR_
0805USBF-901MR_
0805USBF-172MR_
0805USBF-262MR_
0805USBF-372MR_
10 40 65
25 95 140
35 165 255
55 250 400
105 400 580
0.5 4.6 6.9
2.1 9.1 11.8
4.0 12.8 15.7
5.7 15.4 18.5
5.8 18.1 22.3
28
60
101
165
241
0.11 250 500
0.14 250 500
0.22 250 500
0.235 250 500
0.27 250 500
0805USBF-502MR_
0805USBF-672MR_
0805USBF-902MR_
145 545 800
160 670 1090
200 900 1400
11.2 21.6 25.2
11.3 23.3 27.7
12.6 25.4 30.0
315
434
560
0.32 250 500
0.37 250 450
0.63 250 350
1. When ordering, please specify packaging code:
0805USBF-902MRC
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plas-
tic tape (7500 parts per full reel).
2. Inductance measured at 100 MHz using an Agilent/HP 4286A
impedance analyzer and a Coilcraft SMD-A fixture.
3. DCR is specified per winding.
4. Current that causes a 15°C temperature rise from 25°C ambient.
This information is for reference only and does not represent abso-
lute maximum ratings.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.080 ±0.004
2,03 ±0,10
0.055
1,40
max
0.020 0.040
0,51 1,02
0.004
0,10
0.018
0,46
12
0.050 ±0.004
1,27 ±0,10
43
Dimensions
are
in
inches
mm
12
43
0.030 0.036
0,76 0,91
2
0.014
1 0,36
34
Recommended
Land Pattern
0.020
0,51
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 1270-1  Revised 03/31/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 0805USBF-372MRB electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 0805USBF-372MRB.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
0805USBF-372MRBThe function is Low Profile USB Common Mode Choke. CoilcraftCoilcraft
0805USBF-372MRCThe function is Low Profile USB Common Mode Choke. CoilcraftCoilcraft
0805USBF-372MRDThe function is Low Profile USB Common Mode Choke. CoilcraftCoilcraft

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

0805     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search