DataSheet39.com

What is 0805USBN-701MRB?

This electronic component, produced by the manufacturer "Coilcraft", performs the same function as "Ultra Low Profile Common Mode Choke".


0805USBN-701MRB Datasheet PDF - Coilcraft

Part Number 0805USBN-701MRB
Description Ultra Low Profile Common Mode Choke
Manufacturers Coilcraft 
Logo Coilcraft Logo 


There is a preview and 0805USBN-701MRB download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! 0805USBN-701MRB datasheet, circuit

Document 1304-1
Ultra Low Profile Common Mode Choke 0805
• For noise suppression in super high speed signal lines: USB 3.x,
HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high speed
differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
• Up to 6.5 GHz differential mode 3 dB cutoff frequency; up to
35 dB common mode noise attenuation in GHz range
• Lowest profile 0805 common mode choke – 0.93 mm tall
Core material Ferrite
Environmental  RoHS compliant
Terminations  Matte tin over nickel over silver-platinum-glass frit.
Weight  9.0 – 13.0 mg
Ambient temperature  –40°C to +125°C with Irms current.
­Maximum part temperature 140°C
Storage temperature  Component: –40°C to +155°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7reel; 7500/13reel;  Plastic tape:  8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.07 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Common mode
impedance typ (Ohms)
10 MHz 100 MHz 500 MHz
Common mode DCR
attenuation typ (dB) Inductance2 max3 Isolation4 Irms5
10 MHz 100 MHz 500 MHz min (nH) (Ohms) (Vrms) (mA)
0805USBN-121MR_ 2
0805USBN-271MR_ 3
0805USBN-481MR_ 5
0805USBN-701MR_ 7
0805USBN-941MR_ 10
12 57
27 125
48 231
70 342
94 493
0.04 0.5 5.0
0.09 1.4 10.0
0.13 3.5 14.7
0.18 5.3 17.4
0.30 7.6 21.1
14
30
53
77
105
0.11 250 500
0.14 250 500
0.22 250 500
0.235 250 500
0.27 250 500
0805USBN-132MR_ 13 130 697
0805USBN-162MR_ 17 165 955
0805USBN-222MR_ 24 225 1310
0.50 10.0 24.4
0.78 12.1 27.3
1.14 14.0 30.0
140
182
252
0.32
0.37
0.63
250 500
250 450
250 350
1. When ordering, please specify packaging code:
0805USBN-222MRC
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plas-
tic tape (7500 parts per full reel).
2. Inductance measured at 100 MHz using an Agilent/HP 4286A
impedance analyzer and a Coilcraft SMD-A fixture.
3. DCR is specified per winding.
4. Winding to winding isolation (hipot) tested for one minute.
5. Current per winding that causes a 15°C rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.087
2,2
max
0.020 0.040
0,51 1,02
1
4
0.037
0,93
max
0.004
0,10
0.018
0,46
2
0.055
1,4
max
3
Dimensions
are
in
inches
mm
12
43
0.030 0.036
0,76 0,91
2
0.014
1 0,36
34
Recommended
Land Pattern
0.020
0,51
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 1304-1  Revised 05/11/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 0805USBN-701MRB electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 0805USBN-701MRB.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
0805USBN-701MRBThe function is Ultra Low Profile Common Mode Choke. CoilcraftCoilcraft
0805USBN-701MRCThe function is Ultra Low Profile Common Mode Choke. CoilcraftCoilcraft
0805USBN-701MRDThe function is Ultra Low Profile Common Mode Choke. CoilcraftCoilcraft

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

0805     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search