|
|
PDF SN8P2501B1 Data sheet ( Hoja de datos )
| Número de pieza | SN8P2501B1 | |
| Descripción | 8-Bit Micro-Controller | |
| Fabricantes | SONiX | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SN8P2501B1 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
SN8P2501B/B1
IHRC I/O Type 8-Bit Micro-Controller
SN8P2501B/B1
USER’S MANUAL
Preliminary Version 0.1
SN8P2501B
SN8P2501B1
SONiX 8-Bit Micro-Controller
SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical
implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product
could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or
unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against
all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of
the part.
SONiX TECHNOLOGY CO., LTD
Page 1
Preliminary Version 0.1
1 page  
SN8P2501B/B1
IHRC I/O Type 8-Bit Micro-Controller
8.3 TC0 8-BIT TIMER/COUNTER ....................................................................................................72
8.3.1 OVERVIEW.........................................................................................................................72
8.3.2 TC0 TIMER OPERATION...................................................................................................73
8.3.3 TC0M MODE REGISTER ...................................................................................................74
8.3.4 TC0C COUNTING REGISTER............................................................................................75
8.3.5 TC0R AUTO-RELOAD REGISTER ....................................................................................76
8.3.6 TC0 EVENT COUNTER......................................................................................................77
8.3.7 TC0 BUZZER OUTPUT ......................................................................................................77
8.3.8 PULSE WIDTH MODULATION (PWM) ............................................................................78
8.3.9 TC0 TIMER OPERATION EXPLAME................................................................................80
99 INSTRUCTION TABLE......................................................................................................................82
1100 ELECTRICAL CHARACTERISTIC ...............................................................................................83
10.1 ABSOLUTE MAXIMUM RATING .............................................................................................83
10.2 ELECTRICAL CHARACTERISTIC............................................................................................83
10.3 CHARACTERISTIC GRAPHS ....................................................................................................84
1111 DEVELOPMENT TOOL .................................................................................................................85
11.1 SN8P2501A/B/C EV-KIT ..............................................................................................................85
11.2 ICE AND EV-KIT APPLICATION NOTIC ...................................................................................86
1122 OTP PROGRAMMING PIN ............................................................................................................87
12.1 WRITER TRANSITION BOARD SOCKET PIN ASSIGNMENT ................................................87
12.2 PROGRAMMING PIN MAPPING:..............................................................................................88
1133 MARKING DEFINITION................................................................................................................89
13.1 INTRODUCTION........................................................................................................................89
13.2 MARKING INDETIFICATION SYSTEM ...................................................................................89
13.3 MARKING EXAMPLE................................................................................................................89
13.4 DATECODE SYSTEM ................................................................................................................90
1144 PACKAGE INFORMATION...........................................................................................................91
14.1 P-DIP 14 PIN................................................................................................................................91
14.2 SOP 14 PIN ..................................................................................................................................92
14.3 SSOP 16 PIN ................................................................................................................................93
SONiX TECHNOLOGY CO., LTD
Page 5
Preliminary Version 0.1
5 Page 
SN8P2501B/B1
IHRC I/O Type 8-Bit Micro-Controller
2.1.1 RESET VECTOR (0000H)
A one-word vector address area is used to execute system reset.
F Power On Reset (NT0=1, NPD=0).
F Watchdog Reset (NT0=0, NPD=0).
F External Reset (NT0=1, NPD=1).
After power on reset, external reset or watchdog timer overflow reset, then the chip will restart the program from
address 0000h and all system registers will be set as default values. It is easy to know reset status from NT0, NPD
flags of PFLAG register. The following example shows the way to define the reset vector in the program memory.
Ø Example: Defining Reset Vector
ORG
JMP
…
0
START
; 0000H
; Jump to user program address.
START:
ORG
…
…
10H
; 0010H, The head of user program.
; User program
ENDP
; End of program
SONiX TECHNOLOGY CO., LTD
Page 11
Preliminary Version 0.1
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet SN8P2501B1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SN8P2501B | 8-Bit Micro-Controller | SONiX |
| SN8P2501B1 | 8-Bit Micro-Controller | SONiX |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |