DataSheet39.com

What is ALT6713?

This electronic component, produced by the manufacturer "ANADIGICS", performs the same function as "LTE Linear PAM".


ALT6713 Datasheet PDF - ANADIGICS

Part Number ALT6713
Description LTE Linear PAM
Manufacturers ANADIGICS 
Logo ANADIGICS Logo 


There is a preview and ALT6713 download ( pdf file ) link at the bottom of this page.





Total 10 Pages



Preview 1 page

No Preview Available ! ALT6713 datasheet, circuit

FEATURES
• LTE Compliant
• 4th Generation HELPTM technology
• High Efficiency (LTE MPR = 0 dB):
• 35 % @ POUT = +27.5 dBm
• 18 % @ POUT = +16 dBm
• 12 % @ POUT = +6 dBm
Low Quiescent Current: 3 mA
Low Leakage Current in Shutdown Mode: <5 µA
Internal Voltage Regulator
Integrated “daisy chainable” directional coupler
with CPLIN and CPLOUT port.
Optimized for a 50 System
1.8 V Control Logic
RoHS Compliant Package, 260 oC MSL-3
ALT6713
HELP4TM UMTS700 (Bands 13 & 14)
LTE Linear PAM
Data Sheet - Rev 2.7
ALT6713
M45 Package
10 Pin 3 mm x 3 mm x 1 mm
Surface Mount Module
APPLICATIONS
Band 13 & 14 LTE Wireless Devices
PRODUCT DESCRIPTION
The ALT6713 HELP4TM PA is a 4th generation HELPTM
product for LTE devices operating in UMTS 700 MHz
Bands 13 and 14. This PA incorporates ANADIGICS’
HELP4TM technology to deliver exceptional efficiency
at low power levels and low quiescent current without
the need for external voltage regulators or converters.
The device is manufactured using advanced InGaP-
PlusTM HBT technology offering state-of-the-art
reliability, temperature stability, and ruggedness.
Three selectable bias modes that optimize efficiency
for different output power levels and a shutdown
mode with low leakage current increase handset
talk and standby time. A “daisy chainable” directional
coupler is integrated in the module, thus eliminating
the need of an external coupler. The self-contained
3 mm x 3 mm x 1 mm surface mount package
incorporates matching networks optimized for output
power, efficiency, and linearity in a 50 system.
GND at Slug (pad)
VBATT
1
10 VCC
RFIN 2
CPL
9 RFOUT
VMODE2
3
VMODE1
4
Bias Control
Voltage Regulation
8 CPLIN
7 GND
VEN 5
6 CPLOUT
Figure 1: Block Diagram
02/2012

line_dark_gray
ALT6713 equivalent
ALT6713
APPLICATION INFORMATION
To ensure proper performance, refer to all related
Application Notes on the ANADIGICS web site:
http://www.anadigics.com
Shutdown Mode
The power amplifier may be placed in a shutdown mode
by applying logic low levels (see Operating Ranges
table) to the VEN, VMODE1 and VMODE2 voltages.
Bias Modes
The power amplifier may be placed in either Low,
Medium or High Bias modes by applying the
appropriate logic level (see Operating Ranges table)
to the VMODE pins. The Bias Control table below lists
the recommended modes of operation for various
applications.
Three operating modes are recommended to optimize
current consumption. High Bias/High Power operating
mode is for POUT levels > 16 dBm. At ~16 dBm - 6 dBm,
the PA could be switched to Medium Power Mode. For
POUT levels < ~6 dBm, the PA could be switched to Low
Power Mode for extremely low current consumption.
Vcontrols
Venable/Vmode(s)
On Sequence Start
T_0N =0µ
ON Sequence
Rise/Fall Max 1µS
Defined at 10% to 90%
of Min/Max Voltage
Off Sequence Start
T_0FF= 0µ
OFF Sequence
RFIN
notes 1,2
VEN
VCC
note 1
T_0N+1µS
T_0N+3 µS
T_0FF+2µS T_0FF+3µS
Referenced After 90% of Rise
Time
Referenced Before10% of Fall
Time
Notes:
Figure 3: Minimum Recommended ON/OFF Timing Sequence
(1) Level may be changed after RF is ON.
(2) RF OFF defined as Pin ≤ -30 dBm.
(3) Simultaneous switching of VMODE and VEN is not recommended
APPLICATION
POUT
LEVELS
Table 5: Bias Control
BIAS
MODE
VEN
VMODE1
VMODE2
VCC
Low power
(Low Bias Mode)
< +6 dBm
Low +1.8 V +1.8 V +1.8 V 3.2 - 4.35 V
Med power
> 6 dBm
(Medium Bias Mode) < +16 dBm
Low
+1.8 V +1.8 V 0 V 3.2 - 4.35 V
High power
(High Bias Mode)
> +16 dBm High +1.8 V 0 V
0 V 3.2 - 4.35 V
Shutdown
- Shutdown 0 V 0 V 0 V 3.2 - 4.35 V
5 Data Sheet - Rev 2.7
02/2012
VBATT
> 3.2 V
> 3.2 V
> 3.2 V
> 3.2 V


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ALT6713 electronic component.


Information Total 10 Pages
Link URL [ Copy URL to Clipboard ]
Download [ ALT6713.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
ALT6713The function is LTE Linear PAM. ANADIGICSANADIGICS

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

ALT6     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search