|
|
Número de pieza | ALT6708 | |
Descripción | Linear PAM | |
Fabricantes | ANADIGICS | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ALT6708 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! FEATURES
• HSPA, LTE Compliant
• 4th Generation HELPTM technology
• High Efficiency (R99 waveform):
• 40 % @ POUT = +28.8 dBm
• 26 % @ POUT = +17 dBm
• 17 % @ POUT = +13.5 dBm
• 18 % @ POUT = +7.5 dBm
• 10 % @ POUT = +3.5 dBm
• Low Quiescent Current: 3 mA
• Low Leakage Current in Shutdown Mode: <5 µA
• Internal Voltage Regulator
• Integrated “daisy chainable” directional coupler
with CPLIN and CPLOUT port.
• Internal DC Blocks on all RF ports
• Optimized for a 50 Ω System
• 1.8V Control Logic
• RoHS Compliant Package, 260 oC MSL-3
APPLICATIONS
• Band 8 LTE Wireless Devices
• Band 8 (EGSM) WCDMA/HSPA Wireless
Devices
ALT6708
HELP4TM UMTS900 (Band 8)
WCDMA, LTE Linear PAM
Data Sheet - Rev 2.3
ALT6708
M45 Package
10 Pin 3 mm x 3 mm x 1 mm
Surface Mount Module
integrated in the module, thus eliminating the need of
an external coupler. The self-contained 3 mm x 3 mm
x 1 mm surface mount package incorporates matching
networks optimized for output power, efficiency, and
linearity in a 50 Ω system.
GND at Slug (pad)
PRODUCT DESCRIPTION
The ALT6708 HELP4TM PA is a 4th generation HELPTM
product for LTE and WCDMA devices operating in
UMTS900 (Band 8) . This PA incorporates ANADIGICS’
HELP4TM technology to deliver exceptional efficiency
at low power levels and low quiescent current without
the need for external voltage regulators or converters.
The device is manufactured using advanced InGaP-
PlusTM HBT technology offering state-of-the-art
reliability, temperature stability, and ruggedness.
Three selectable bias modes that optimize efficiency
for different output power levels and a shutdown mode
with low leakage current increase handset talk and
standby time. A “daisy chainable” directional coupler is
VBATT
1
RFIN 2
VMODE2
3
VMODE1
4
VEN 5
10 VCC
CPL
9 RFOUT
Bias Control
Voltage Regulation
8 CPLIN
7 GND
6 CPLOUT
Figure 1: Block Diagram
03/2012
1 page ALT6708
Table 5: Electrical Specifications - WCDMA Operation (R99 Modulation)
(TC = +25 °C, VCC = +3.4 V, VBATT = +3.4 V, VEN = +1.8 V, 50 Ω system)
PARAMETER
COMMENTS
MIN TYP MAX UNIT
POUT
VMODE1 VMODE2
Gain
25 27.5 31
14 17.5 21
9 12.5 16
POUT = +28.8 dBm 0 V
0V
dB POUT = +17 dBm 1.8 V 0 V
POUT = +7.5 dBm 1.8 V 1.8 V
ACLR1 at 5 MHz offset (1)
- -41 -37
POUT = +28.8 dBm 0 V
0V
-
-42 -37
dBc POUT = +17 dBm
1.8 V 0 V
- -41 -37
POUT = +7.5 dBm 1.8 V 1.8 V
ACLR2 at 10 MHz offset
- -55 -48
POUT = +28.8 dBm 0 V
0V
-
-57 -48
dBc POUT = +17 dBm
1.8 V 0 V
- -59 -48
POUT = +7.5 dBm 1.8 V 1.8 V
Power-Added Efficiency (1)
36 40 -
22 26 -
- 17 -
13 18 -
- 10 -
POUT = +28.8 dBm 0 V
0V
POUT = +17 dBm
1.8 V 0 V
% POUT = +13.5 dBm 1.8 V 0 V
POUT = +7.5 dBm 1.8 V 1.8 V
POUT = +3.5 dBm 1.8 V 1.8 V
Spurious Output Level
(all spurious outputs)
POUT +28.8 dBm
-
-
<-70
dBc
In-band land VSWR < 5:1
Out-of-band load VSWR < 10 : 1
Applies over all operating ranges
Load mismatch stress with no
permanent degradation or failure
8:1
-
Notes:
(1) ACLR and Efficiency measured at 897.5 MHz.
- VSWR Applies over full operating range
5 Data Sheet - Rev 2.3
03/2012
5 Page ALT6708
ORDERING INFORMATION
ORDER NUMBER
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
COMPONENT PACKAGING
ALT6708RM45Q7
-40 oC to +90 oC
RoHS Compliant 10 Pin
3 mm x 3 mm x 1 mm Tape and Reel, 2500 pieces per Reel
Surface Mount Module
ALT6708RM45P9
-40 oC to +90 oC
RoHS Compliant 10 Pin
3 mm x 3 mm x 1 mm Partial Tape and Reel
Surface Mount Module
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers
to verify that the information they are using is current before placing orders.
warning
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
11 Data Sheet - Rev 2.3
03/2012
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet ALT6708.PDF ] |
Número de pieza | Descripción | Fabricantes |
ALT6701 | Multimode PAM | ANADIGICS |
ALT6702 | Multimode PAM | ANADIGICS |
ALT6704 | WCDMA/LTE/CDMA Mixed Mode PAM | ANADIGICS |
ALT6705 | Multimode PAM | ANADIGICS |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |