|
|
Número de pieza | PI3USB102G | |
Descripción | USB 2.0 High-Speed (480 Mbps) Switch | |
Fabricantes | Pericom Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PI3USB102G (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! PI3USB102G
USB 2.0 High-Speed (480 Mbps) Switch with 5V Protection
with Improved Ioff Voltage Range
Features
• USB 2.0 compliant (high speed, full speed, and low speed)
• RON: 4.0Ω typical @ VDD = 3.0V
• Channel On Capacitance: 6.0pF
• Wide -3dB Bandwidth: 1,000MHz
• Low bit-to-bit skew
• Low Crosstalk: -29B @ 480 Mbps
• Off Isolation: -28dB @ 480 Mbps
• Near-Zero propagation delay: 250ps
• Support 1.8-V logic on control pins
• VDD Operating Range: 3.0V to 5.5V
• ESD: 8kV HBM on Y+/Y- pins per JESD22 standard
• Y+/Y- pins have over-voltage protection and can tolerate a
short to VBUS
• Packaging (Pb-free & Green):
10-contact TQFN, 1.3mm x 1.6mm x 0.75mm (ZL10)
Description
The PI3USB102G is a single differential channel 2:1 multiplexer/
demultiplexer USB 2.0 Switch. Industry leading advantages include
a propagation delay of 250ps, resulting from its low channel re-
sistance and I/O capacitance. PI3USB102G is bidirectional and
offers very little attenuation of high-speed signals. It is designed
for low bit-to-bit skew, high channel-to-channel noise isolation
and is compatible with various standards, such as High Speed
USB 2.0 (480 Mb/s).
The PI3USB102G offers over voltage protection for the Y+/Y- pins
as per the USB 2.0 specification. With the chip powered on or off if
Y+/Y- pins are shorted to VBUS (5V +/- 5%), M+/M- and D+/D-
outputs are clamped to provide voltage protection for downstream
devices.
The PI3USB102G has a better Y+/Y- power-off leakage current
with the voltage range of 0V to 5V versus 0V to 3.3V for the
PI3USB102E.
Application
• Routes signals for USB 2.0
• PC, Notebooks and Hand-held devices
Block Diagram
over voltage
protection
Y+
Y-
over voltage
protection
SEL
OE
Control
Logic
M+
M-
D+
D-
14-0136
1 09/18/14
1 page PI3USB102G
USB 2.0 High-Speed (480 Mbps) Switch with 5V Protection
Test Circuit for Dynamic Electrical Characteristics
DUT
Test Circuit for Electrical Characteristics
VDD
Pulse
Generator
D.U.T.
VOUT
RT
200-ohm
6.0V
10pF
200-ohm
Notes:
1. CL = Load capacitance: includes jig and probe capacitance.
2. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator
3. All input impulses are supplied by generators having the following characteristics: ZO = 50Ω, tR ≤ 2.5ns, tF ≤ 2.5ns.
4. The outputs are measured one at a time with on transition per measurement.
Switch Positions
Test
tPLZ, tPZL
tPHZ, tPZH
Prop Delay
Switch
6.0V
GND
Open
Application Example Diagram
14-0136
5 09/18/14
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet PI3USB102G.PDF ] |
Número de pieza | Descripción | Fabricantes |
PI3USB102 | USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted | Pericom Semiconductor |
PI3USB102E | USB 2.0 High-Speed (480 Mbps) Switch | Pericom Semiconductor |
PI3USB102G | USB 2.0 High-Speed (480 Mbps) Switch | Pericom Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |