XC9252 Datasheet PDF - Torex Semiconductor
Part Number | XC9252 | |
Description | Low Power Consumption Step-down DC/DC Controller IC | |
Manufacturers | Torex Semiconductor | |
Logo | ||
There is a preview and XC9252 download ( pdf file ) link at the bottom of this page. Total 28 Pages |
Preview 1 page No Preview Available ! XC9252 Series
Low Power Consumption Step-down DC/DC Controller IC
ETR05038-004
■GENERAL DESCRIPTION
The XC9252 series is a 30V operation step-down DC/DC controller IC. The external P-ch driver transistor is used to achieve a stable operation
under low input voltage. Low ESR capacitors such as ceramic capacitors can be used for the load capacitor (CL).
A 0.8V reference voltage source is incorporated, and the output voltage can be set freely from 1.5V using external resistors (RFB1, RFB2).
280kHz to 550kHz can be selected for the switching frequency by connecting an external resistor to the ROSC pin. The generation of unneeded
noise can be reduced by this synchronization with an external CLK within ±25% of the internal clock using the MODE/SYNC pin. In automatic
PWM/PFM control, the IC operates by PFM control when the load is light to achieve high efficiency over the full load range from light to heavy.
The soft start time can be set as desired by adding an external capacitance to the SS pin.
With the built-in UVLO function, the driver transistor is forced OFF when input voltage becomes 2.5V or lower.
Internal protection circuits include over current protection, short-circuit protection, and thermal shutdown circuits to enable safe use.
■APPLICATIONS
●Car navigation systems
●Car audios
●ETC automotives
■FEATURES
Input Voltage Range
FB Voltage
Supply Current
Oscillation Frequency
External Clocking Synchronous
Control Method
Soft-Start
Protection Circuits
Output Capacitor
Operating Ambient Temperature
Packages
Environmentally Friendly
: 3.0V~30V (Absolute MAX. Rating: 36V)
: 0.8V (±2%)
: 30μA (@300kHz)
: 280kHz~550kHz (External Resistor)
:±25% of the internal clock
: PWM control (MODE:H)
PWM/PFM (MODE:L)
: External set (External C)
: Over current limit (External Resistor)
Automatic Return (XC9252A/B)
Integral latch protection (XC9252C)
Thermal shutdown
: Low ESR Capacitor
: -40℃~+105℃
: TSSOP-16 (XC9252A/C)
USP-10B (XC9252B)
: EU RoHS Compliant, Pb Free
■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE
CHARACTARISTICS
XC9252x08A(VIN=12V, VOUT=5.7V, fOSC=280kHz)
L=22μH(CLF12555-220M), CIN=10μF(GRM32ER71H106KA12L),
ROSC=300kΩ, CL=22μF×2 (GRM32ER71E226KE15L),
RSENSE=50mΩ, PchMOSFET:2SJ668, SBD:CMS15
100
90
80
70
60
50
40
30
20 PFM(MODE=L)
10 PWM(MODE=H)
0
1
10
100
1000
10000
Output Current :IOUT[mA]
1/28
|
|
XC9252
Series
■ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
Ta=25℃
UNITS
VIN Pin Voltage
CE Pin Voltage
FB Pin Voltage
VL Pin Voltage
VL Pin Current
SS Pin Voltage
ROSC Pin Voltage
MODE/SYNC Pin Voltage
PG Pin Voltage (*6)
PG Pin Current (*6)
CLAMP Pin Voltage
CLAMP Pin Current
ISENSE Pin Voltage
EXTB Pin Voltage
EXTB Pin Current
Power
Dissipation
TSSOP-16
USP-10B
Surge Voltage
Operating Ambient Temperature
Storage Temperature
VIN
VCE
VFB
VVL
IVL
VSS
VROSC
VMODE
VPG
IPG
VCLAMP
ICLAMP
VISENSE
VEXT
IEXT
Pd
VSURGE
Topr
Tstg
-0.3 ~ +36
-0.3 ~ +36
-0.3 ~ +6.5
-0.3 ~ VIN+0.3 or +6.5 (*1)
10
-0.3 ~ VVL+0.3 or +6.5 (*2)
-0.3 ~ VVL+0.3 or +6.5 (*2)
-0.3 ~ +6.5
-0.3 ~ +6.5
5
-0.3 or VIN-6.5 (*4) ~ VIN+0.3 or +36 (*3)
10
-0.3 or VIN-6.5 or VCLAMP-0.3 (*5) ~ VIN+0.3 or +36 (*3)
-0.3 or VIN-6.5 or VCLAMP-0.3 (*5) ~ VIN+0.3 or +36 (*3)
100
350
150
46 (*7)
-40~+105
-55~+125
V
V
V
V
mA
V
V
V
V
mA
V
mA
V
V
mA
mW
-
℃
℃
* All voltages are described based on the GND pin.
(*1) The maximum value should be either VIN+0.3 or +6.5 in the lowest.
(*2) The maximum value should be either VVL+0.3 or +6.5 in the lowest.
(*3) The maximum value should be either VIN+0.3 or +36 in the lowest.
(*4) The minimum value should be either -0.3 or VIN-6.5 in the highest.
(*5) The minimum value should be either -0.3 or VIN-6.5 or VCLAMP-0.3 in the highest.
(*6) For the XC9252 Type A and C only.
(*7) Applied Time≦400ms
5/28
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for XC9252 electronic component. |
Information | Total 28 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ XC9252.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
XC9250 | The function is 30V Driver Transistor Built-In Step-Down DC/DC Converters. Torex Semiconductor | |
XC9251 | The function is 30V Driver Transistor Built-In Step-Down DC/DC Converters. Torex Semiconductor | |
XC9252 | The function is Low Power Consumption Step-down DC/DC Controller IC. Torex Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
XC92
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |