|
|
PDF FNC42060F Data sheet ( Hoja de datos )
| Número de pieza | FNC42060F | |
| Descripción | Motion SPM 45 module | |
| Fabricantes | Fairchild Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FNC42060F (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
FNC42060F / FNC42060F2
Motion SPM® 45 Series
January 2014
Features
• UL Certified No. E209204 (UL1557)
• 600 V - 20 A 3-Phase IGBT Inverter with Integral Gate
Drivers and Protection
• Low Thermal Resistance Using Ceramic Substrate
• Low-Loss, Short-Circuit Rated IGBTs
• Built-In Bootstrap Diodes and Dedicated Vs Pins Sim-
plify PCB Layout
• Built-In NTC Thermistor for Temperature Monitoring
• Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing
• Single-Grounded Power Supply
• Optimized for 5 kHz Switching Frequency
• Isolation Rating: 2000 Vrms / min.
General Description
FNC42060F / FNC42060F2 is an advanced Motion
SPM® 45 module providing a fully-featured, high-perfor-
mance inverter output stage for AC Induction, BLDC,
and PMSM motors. These modules integrate optimized
gate drive of the built-in IGBTs to minimize EMI and
losses, while also providing multiple on-module protec-
tion features including under-voltage lockouts, over-cur-
rent shutdown, thermal monitoring, and fault reporting.
The built-in, high-speed HVIC requires only a single sup-
ply voltage and translates the incoming logic-level gate
inputs to the high-voltage, high-current drive signals
required to properly drive the module's robust short-cir-
cuit-rated IGBTs. Separate negative IGBT terminals are
available for each phase to support the widest variety of
control algorithms.
Applications
• Motion Control - Home Appliance / Industrial Motor
Related Resources
• AN-9070 - Motion SPM® 45 Series Users Guide
• AN-9071 - Motion SPM® 45 Series Thermal Perfor-
mance Information
• AN-9072 - Motion SPM® 45 Series Mounting Guid-
ance
• RD-344 - Reference Design (Three Shunt Solution)
• RD-345 - Reference Design (One Shunt Solution)
Figure 1. Package Overview
Package Marking and Ordering Information
Device
FNC42060F
FNC42060F2
Device Marking
FNC42060F
FNC42060F2
Package
SPMAA-A26
SPMAA-C26
Packing Type
Rail
Rail
Quantity
12
12
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
1
www.fairchildsemi.com
1 page  
Absolute Maximum Ratings (TJ = 25°C, unless otherwise specified.)
Inverter Part
Symbol
Parameter
Conditions
VPN
VPN(Surge)
VCES
± IC
± ICP
Supply Voltage
Supply Voltage (Surge)
Collector - Emitter Voltage
Each IGBT Collector Current
Each IGBT Collector Current (Peak)
Applied between P - NU, NV, NW
Applied between P - NU, NV, NW
TC = 25°C, TJ ＜ 150°C
TC = 25°C, TJ ＜ 150°C, Under 1 ms Pulse
Width
PC Collector Dissipation
TJ Operating Junction Temperature
TC = 25°C per Chip
(2nd Note 1)
2nd Notes:
1. The maximum junction temperature rating of the power chips integrated within the Motion SPM® 45 product is 150C.
Rating
450
500
600
20
40
50
-40 ~ 150
Unit
V
V
V
A
A
W
°C
Control Part
Symbol
Parameter
VCC Control Supply Voltage
VBS High - Side Control Bias Voltage
VIN Input Signal Voltage
VFO Fault Output Supply Voltage
IFO Fault Output Current
VSC Current-Sensing Input Voltage
Conditions
Rating
Applied between VCC(H), VCC(L) - COM
Applied between VB(U) - VS(U), VB(V) - VS(V),
VB(W) - VS(W)
Applied between IN(UH), IN(VH), IN(WH),
IN(UL), IN(VL), IN(WL) - COM
Applied between VFO - COM
Sink Current at VFO pin
Applied between CSC - COM
20
20
-0.3 ~ VCC + 0.3
-0.3 ~ VCC + 0.3
1
-0.3 ~ VCC + 0.3
Unit
V
V
V
V
mA
V
Bootstrap Diode Part
Symbol
Parameter
VRRM
IF
IFP
Maximum Repetitive Reverse Voltage
Forward Current
Forward Current (Peak)
TJ Operating Junction Temperature
Conditions
TC = 25°C, TJ ＜ 150°C
TC = 25°C, TJ ＜ 150°C, Under 1 ms Pulse
Width
Rating
600
0.50
1.50
-40 ~ 150
Unit
V
A
A
°C
Total System
Symbol
Parameter
VPN(PROT) Self-Protection Supply Voltage Limit
(Short-Circuit Protection Capability)
TSTG
VISO
Storage Temperature
Isolation Voltage
Conditions
VCC = VBS = 13.5 ~ 16.5 V
TJ = 150°C, Non-Repetitive, < 2 s
60 Hz, Sinusoidal, AC 1 Minute, Connect
Pins to Heat Sink Plate
Rating
400
-40 ~ 125
2000
Unit
V
°C
Vrms
Thermal Resistance
Symbol
Parameter
Conditions
Rth(j-c)Q
Rth(j-c)F
Junction to Case Thermal Resistance Inverter IGBT Part (per 1 / 6 module)
Inverter FWDi Part (per 1 / 6 module)
2nd Notes:
2. For the measurement point of case temperature (TC), please refer to Figure 2.
Min.
-
-
Typ.
-
-
Max.
2.5
3.6
Unit
°C / W
°C / W
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
5
www.fairchildsemi.com
5 Page 
Time Charts of Protective Function
Input Signal
Protection
Circuit State
Control
Supply Voltage
RESET
SET
UVCCR
a1
UVCCD
a2
a3
a4
RESET
a6
a7
Output Current
Fault Output Signal
a5
a1 : Control supply voltage rises: after the voltage rises UVCCR, the circuits start to operate when next input is applied.
a2 : Normal operation: IGBT ON and carrying current.
a3 : Under-voltage detection (UVCCD).
a4 : IGBT OFF in spite of control input condition.
a5 : Fault output operation starts.
a6 : Under-voltage reset (UVCCR).
a7 : Normal operation: IGBT ON and carrying current.
Figure 11. Under-Voltage Protection (Low-Side)
Input Signal
Protection
Circuit State
Control
Supply Voltage
RESET
UVBSR
b1
UVBSD
b2
SET
b3
b4
RESET
b5
b6
Output Current
High-level (no fault output)
Fault Output Signal
b1 : Control supply voltage rises: after the voltage reaches UVBSR, the circuits start to operate when next input is applied.
b2 : Normal operation: IGBT ON and carrying current.
b3 : Under-voltage detection (UVBSD).
b4 : IGBT OFF in spite of control input condition, but there is no fault output signal.
b5 : Under-voltage reset (UVBSR).
b6 : Normal operation: IGBT ON and carrying current.
Figure 12. Under-Voltage Protection (High-Side)
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
11
www.fairchildsemi.com
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet FNC42060F.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FNC42060F | Motion SPM 45 module | Fairchild Semiconductor |
| FNC42060F2 | Motion SPM 45 module | Fairchild Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |