DataSheet39.com

What is JCE0612S05?

This electronic component, produced by the manufacturer "XP Power", performs the same function as "DC-DC Converter".


JCE0612S05 Datasheet PDF - XP Power

Part Number JCE0612S05
Description DC-DC Converter
Manufacturers XP Power 
Logo XP Power Logo 


There is a preview and JCE0612S05 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! JCE0612S05 datasheet, circuit

6 Watts
JCE Series
xppower.com
2:1 Input Range
DIP 24 Plastic Case
Operating Temperature 40 °C to +100 °C
Single & Dual Outputs
Optional Metal Case
1500 VDC Isolation, 3000 VDC Option
3 Year Warranty
Specification
Input
Input Voltage Range
• 12 V (9-18 VDC)
24 V (18-36 VDC)
48 V (36-75 VDC)
Input Current
• See table
Input Filter
• Pi network
Input Reflected Ripple • 20 mA pk-pk through 12 µH inductor
and 4.7 µF capacitor
Input Surge
• 12 V models 25 VDC for 100 ms
24 V models 50 VDC for 100 ms
48 V models 100 VDC for 100 ms
Under Voltage Lockout • 12 V models on >8.5 V, off <8.0 V
24 V models on >16.5 V, off <15.5 V
48 V models on >34.5 V, off <33.5 V
Output
Output Voltage
• See table
Output Voltage Balance • ±2% max, dual output models
Initial Set Accuracy • ±2% max
Minimum Load
• No minimum load required
Line Regulation
• ±0.5% max
Load Regulation
• ±1.2% max, for single output and ±5%
max for dual output from 10-100%
Cross Regulation
• ±5% max, on dual output models
(see note 1)
Start Up Delay
• 20 ms typical
Ripple & Noise
• 80 mV pk-pk (100 mV for D24 models),
20 MHz bandwidth. See note 2
Transient Response
• 3% max deviation, recovery to within 1%
in 300 µs for a 25% load change (4%
max. deviation for S3V3 models)
Overload Protection • 135% - 185% of full load
Short Circuit Protection • Trip and restart (hiccup mode),
auto recovery
Maximum Capacitive • See table
Load
Temperature
Coefficient
• 0.02%/°C max
General
Efficiency
Isolation Voltage
Isolation Capacitance
Isolation Resistance
Switching Frequency
Power Density
MTBF
• See table
• 1500 VDC Input to Output
For optional high isolation versions
3000 VDC Input to Output add suffix -H to
model number
1000 VDC Input to Case
1000 VDC Output to Case
• 1000 pF typical input to output
• 109
• 330 kHz typical
• 15 W/in3
• >800 KHrs to MIL-STD-217F at 25 °C, GB
Environmental
Operating Temperature • -40 °C to +100 °C (see derating curve)
Case Temperature
• +100 °C max
Storage Temperature • -55 °C to +125 °C
Cooling
• Convection-cooled
Operating Humidity • Up to 95% RH, non-condensing
EMC
Emissions
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Magnetic Field
• EN55022 Class A conducted
• EN61000-4-2, level 3, Perf Criteria B
• EN61000-4-3, 10 V/m, Perf Criteria A
• EN61000-4-4, level 3 Perf Criteria A
• EN61000-4-5, level 2, Perf Criteria A*
• EN61000-4-6, 10 Vrms, Perf Criteria A
• EN61000-4-8, 1 A/m, Perf Criteria A
* External input capacitor required, 220µF/100V (See note 7)


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for JCE0612S05 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ JCE0612S05.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
JCE0612S05The function is DC-DC Converter. XP PowerXP Power

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

JCE0     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search